Difficulty

Moderate

Steps

12

Time Required

                          20 - 30 minutes

Sections

2

  • Motherboard
  • 11 steps
  • LCD Screen
  • 1 step

Flags

4

Confusing Text

Some of this guide’s text is confusing, duplicated, or off-topic. Clarify it by editing!

Needs Better Images

Better photos will improve this guide. Help out by taking, editing, or uploading new ones!

Slice and Dice

The steps in this guide should be split up and made into a series of prerequisite guides.

In Progress

This guide is a work in progress. Reload periodically to see the latest changes!

  • BackSony Xperia Sola

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Lay the phone as shown.
  • Place phone down with screen side down and camera side facing up as shown.

Place phone down with screen side down and camera side facing up as shown.

1024

Step 2

              Remove the back cover.
  • Push on cover away from you. You should hear a snap or pop. This will let you view the battery and sim/sd card slots. Then lift the cover off.

Push on cover away from you. You should hear a snap or pop. This will let you view the battery and sim/sd card slots. Then lift the cover off.

Step 3

              Remove the screws.
  • Locate and remove the five (5) screws on the phone, using the 26 Bit Kit. The screws are at the top and the bottom of the phone as shown.

Locate and remove the five (5) screws on the phone, using the 26 Bit Kit. The screws are at the top and the bottom of the phone as shown.

Step 4

              Remove bottom white cover.
  • Pry off the bottom white cover by using the opening tool as a lever.

Pry off the bottom white cover by using the opening tool as a lever.

Step 5

              Remove more screws.
  • Locate and remove the 2 additional screws, using the 26 Bit Kit, that are revealed. These are marked as shown.

Locate and remove the 2 additional screws, using the 26 Bit Kit, that are revealed. These are marked as shown.

Step 6

              Remove black cover.
  • Locate the black cover on the bottom left of phone. Use an opening tool to pry up and remove the black cover.

Locate the black cover on the bottom left of phone. Use an opening tool to pry up and remove the black cover.

Step 7

              Disconnect the battery's circuit.
  • Disconnect the circuit by lifting the connector straight up as shown using the tweezers.

Disconnect the circuit by lifting the connector straight up as shown using the tweezers.

Step 8

              Remove the phone's inner back cover.
  • Turn the phone onto its side, insert plastic opening tool into seam, and gently remove cover. You can also slide the spudger in from the top.
  • Once the cover is loose, lift it off the phone. The side buttons may feel a bit sticky, but this is normal.

Turn the phone onto its side, insert plastic opening tool into seam, and gently remove cover. You can also slide the spudger in from the top.

Once the cover is loose, lift it off the phone. The side buttons may feel a bit sticky, but this is normal.

Step 9

              Remove the additional power circuit.
  • Locate the additional circuit at the bottom left. Using the tweezers, remove it gently by pulling up.

Locate the additional circuit at the bottom left. Using the tweezers, remove it gently by pulling up.

Step 10

              Repeat for the circuit on the top end of the battery.
  • Use the tweezers to lift up on the circuit located at the top left.

Use the tweezers to lift up on the circuit located at the top left.

Step 11

              Remove the motherboard.
  • Use the spudger and slide it under the top left of the board then lift the board straight up. The board should come up very easily.

Use the spudger and slide it under the top left of the board then lift the board straight up. The board should come up very easily.

Step 12

              Remove the LCD screen.
  • Use either the plastic opener or the spudger to slid in the side. It will go in between the LCD screen and the spot you pulled the board off of.

Use either the plastic opener or the spudger to slid in the side. It will go in between the LCD screen and the spot you pulled the board off of.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      5 other people completed this guide.

Author

                                      with 4 other contributors 


                    Cary Drew

Member since: 09/25/2014

866 Reputation

                                      5 Guides authored                  



                       Badges:
                       11







                                                        +8 more badges

Team

                       USF Tampa, Team 1-1, Brown Fall 2014                        

                                                  Member of USF Tampa, Team 1-1, Brown Fall 2014 



                    USFT-BROWN-F14S1G1                     


                                            4 Members                     


                                            5 Guides authored