Difficulty
Moderate
Steps
12
Time Required
15 - 20 minutes
Sections
2
- Motherboard
- 11 steps
- Battery
- 1 step
Flags
5
Confusing Text
Some of this guide’s text is confusing, duplicated, or off-topic. Clarify it by editing!
Needs Better Images
Better photos will improve this guide. Help out by taking, editing, or uploading new ones!
Slice and Dice
The steps in this guide should be split up and made into a series of prerequisite guides.
Grammar Police
Embrace your inner English teacher and help improve this guide’s grammar!
In Progress
This guide is a work in progress. Reload periodically to see the latest changes!
BackSony Xperia Sola
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Lay the phone as shown.
- Place phone down with screen side down and camera side facing up as shown.
Place phone down with screen side down and camera side facing up as shown.
1024
Step 2
Remove the back cover.
- Push on cover away from you. You should hear a snap or pop. This will let you view the battery and sim/sd card slots. Then lift the cover off.
Push on cover away from you. You should hear a snap or pop. This will let you view the battery and sim/sd card slots. Then lift the cover off.
Step 3
Remove the screws.
- Locate and remove the five (5) screws on the phone, using the 26 Bit Kit. The screws are at the top and the bottom of the phone as shown.
Locate and remove the five (5) screws on the phone, using the 26 Bit Kit. The screws are at the top and the bottom of the phone as shown.
Step 4
Remove bottom white cover.
- Pry off the bottom white cover by using the opening tool as a lever.
Pry off the bottom white cover by using the opening tool as a lever.
Step 5
Remove more screws.
- Locate and remove the 2 additional screws, using the 26 Bit Kit, that are revealed. These are marked as shown.
Locate and remove the 2 additional screws, using the 26 Bit Kit, that are revealed. These are marked as shown.
Step 6
Remove black cover.
- Locate the black cover on the bottom left of phone. Use an opening tool to pry up and remove the black cover.
Locate the black cover on the bottom left of phone. Use an opening tool to pry up and remove the black cover.
Step 7
Disconnect the battery's circuit.
- Disconnect the circuit by lifting the connector straight up as shown using the tweezers.
Disconnect the circuit by lifting the connector straight up as shown using the tweezers.
Step 8
Remove the phone's inner back cover.
- Turn the phone onto its side, insert plastic opening tool into seam, and gently remove cover. You can also slide the spudger in from the top.
- Once the cover is loose, lift it off the phone. The side buttons may feel a bit sticky, but this is normal.
Turn the phone onto its side, insert plastic opening tool into seam, and gently remove cover. You can also slide the spudger in from the top.
Once the cover is loose, lift it off the phone. The side buttons may feel a bit sticky, but this is normal.
Step 9
Remove the additional power circuit.
- Locate the additional circuit at the bottom left. Using the tweezers, remove it gently by pulling up.
Locate the additional circuit at the bottom left. Using the tweezers, remove it gently by pulling up.
Step 10
Repeat for the circuit on the top end of the battery.
- Use the tweezers to lift up on the circuit located at the top left.
Use the tweezers to lift up on the circuit located at the top left.
Step 11
Remove the motherboard.
- Use the spudger and slide it under the top left of the board then lift the board straight up. The board should come up very easily.
Use the spudger and slide it under the top left of the board then lift the board straight up. The board should come up very easily.
Step 12
Remove and replace the battery.
- To remove battery, slide a flat object under the battery and lift. The plastic opening tool will be the best tool for this.
- It is possible that the battery may be glued onto the phone. If this is the case, slightly heat the glue to allow removal without breaking the battery. To heat the glue, use a simple hair dryer, but be very careful as not to overheat the phone and damage any components.
To remove battery, slide a flat object under the battery and lift. The plastic opening tool will be the best tool for this.
It is possible that the battery may be glued onto the phone. If this is the case, slightly heat the glue to allow removal without breaking the battery. To heat the glue, use a simple hair dryer, but be very careful as not to overheat the phone and damage any components.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
3 other people completed this guide.
Author
with 7 other contributors
Cary Drew
Member since: 09/25/2014
866 Reputation
5 Guides authored
Badges:
11
+8 more badges
Team
USF Tampa, Team 1-1, Brown Fall 2014
Member of USF Tampa, Team 1-1, Brown Fall 2014
USFT-BROWN-F14S1G1
4 Members
5 Guides authored
martinslunecko - Oct 4, 2016
Reply
Thanks, battery successfully changed :-)
ndiwenijb - Dec 16, 2016
Reply
Thanx will do that when i get areplacement battery!
minigamer - Dec 27, 2016
Reply
hello where i can find a new battery ?