Difficulty

Moderate

Steps

4

Time Required

                          15 - 20 minutes            

Sections

3

  • Rear Cover
  • 1 step
  • Battery
  • 1 step
  • Loudspeaker
  • 2 steps

Flags

1

Member-Contributed Guide

An awesome member of our community made this guide. It is not managed by iFixit staff.

  • BackSony Xperia M2

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

Please SUBSCRIBE to my channel ツ

What you need

Video Overview

Step 1

              Rear Cover               
  • Warm the Back Cover. You can use a hairdryer.
  • Be careful, the Cover is plastic.
  • Use a small suction cup and plastic tools for separating the Rear panel.
  • Before installing the new cover, you must clean the phone from the old adhesive tape and install a new one if your spare part has come without double sided adhesive tape.

Warm the Back Cover. You can use a hairdryer.

Be careful, the Cover is plastic.

Use a small suction cup and plastic tools for separating the Rear panel.

Before installing the new cover, you must clean the phone from the old adhesive tape and install a new one if your spare part has come without double sided adhesive tape.

1024

Step 2

              Battery               
  • Disconnect the Battery Cable.
  • The battery is stuck to the phone fame. Use the white tape to remove it.
  • Li-Polymer Battery, 2230 mAh
  • Part number: LIS1551ERPC
  • Please SUBSCRIBE to my channel ツ

Disconnect the Battery Cable.

The battery is stuck to the phone fame. Use the white tape to remove it.

Li-Polymer Battery, 2230 mAh

Part number: LIS1551ERPC

Step 3

              Loudspeaker               
  • Remove the two T5 screws.
  • Use a plastic tool to unstuck the the Loudspeaker module from the Main frame.

Remove the two T5 screws.

Use a plastic tool to unstuck the the Loudspeaker module from the Main frame.

Step 4

  • Open the Loud speaker module.
  • Loudspeakr
  • Vibromotor
  • Please SUBSCRIBE to my channel ツ

Open the Loud speaker module.

Loudspeakr

Vibromotor

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      5 other people completed this guide.                                             

Author

                                      with 1 other contributor 

                    ZFix                     

Member since: 12/09/2013

187,195 Reputation

                                      330 Guides authored                  



                       Badges:
                       35







                                                        +32 more badges                           

Team

                       Master Techs                        

                                                  Member of Master Techs 



                    Community                     


                                            310 Members                     


                                            1,168 Guides authored                     

Luis Alejandro Araúz - Oct 19, 2021

Reply

For anyone doing this on an Xperia M2 Aqua: BE VERY CAREFUL! There’s strong adhesive foam around the microphone (which points forwards and sits under the screen on the Aqua, unlike the regular M2 where it points downwards). Try your best to detach the loudspeaker module from the mic/vibra/antenna PCB first, then very, VERY carefully pry under the PCB with a plastic tool in order to release the adhesive. If you try to remove the whole assembly by lifting from a corner and pulling it sideways, you WILL break the main microphone. Why they’d put such a delicate component in an accident-prone spot is beyond me. Don’t get me wrong, it’s not an expensive fix, but the inconvenience will get on your nerves haha.