Difficulty

Moderate

Steps

10

Time Required

                          25 - 30 minutes

Sections

1

  • Touch Screen Glass Digitizer
  • 10 steps

Flags

Member-Contributed Guide

An awesome member of our community made this guide. It is not managed by iFixit staff.

  • BackSony Xperia E C1505 C1504

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

Please SUBSCRIBE to my channel ツ

What you need

Video Overview

Step 1

              Touch Screen Glass Digitizer
  • Switch-off the phone.
  • Remove the battery.

Switch-off the phone.

Remove the battery.

1024

Step 2

  • The small bottom bezel is held by 2x locking clips.
  • Preferably use plastic tools for disassembling.

The small bottom bezel is held by 2x locking clips.

Preferably use plastic tools for disassembling.

Step 3

  • There are 4x silver screws and 3x black screws.
  • The rear cover is held by 5x locking clips.
  • Two of them, at the bottom side are more hard for unlocking. You can use a screwdriver or other metal tool to unlock them.

There are 4x silver screws and 3x black screws.

The rear cover is held by 5x locking clips.

Two of them, at the bottom side are more hard for unlocking. You can use a screwdriver or other metal tool to unlock them.

Step 4

  • Remove the back cover.
  • With a plastic tool disconnect one by one:
  • LCD Display flex cable
  • Touchscreen flex cable
  • Menu Buttons Board flex cable
  • Coaxial Wire Antenna cable

Remove the back cover.

With a plastic tool disconnect one by one:

LCD Display flex cable

Touchscreen flex cable

Menu Buttons Board flex cable

Coaxial Wire Antenna cable

Step 5

  • Carefully remove the main board.

Carefully remove the main board.

Step 6

  • Disconnect the other side of the flex cable and remove the Home Buttons board.
  • Unstick the camera button.

Disconnect the other side of the flex cable and remove the Home Buttons board.

Unstick the camera button.

Step 7

  • The touch screen is stuck to the frame with double side adhesive tape.
  • By using plastic tools gently start separating.
  • At the bottom is glued on firmly because the bonded surface is larger.
  • Use a hot air to make separating more easy and safety.

The touch screen is stuck to the frame with double side adhesive tape.

By using plastic tools gently start separating.

At the bottom is glued on firmly because the bonded surface is larger.

Use a hot air to make separating more easy and safety.

Step 8

  • With a plastic tool, carefully separate the LCD display from the touch screen.
  • Clear the touchscreen from the old adhesive tape.

With a plastic tool, carefully separate the LCD display from the touch screen.

Clear the touchscreen from the old adhesive tape.

Step 9

  • Install the new LCD into the frame and put adhesive tape.
  • Be careful not to cover the holes (for the speaker, menu buttons etc.). Install the Touchscreen.

Install the new LCD into the frame and put adhesive tape.

Be careful not to cover the holes (for the speaker, menu buttons etc.). Install the Touchscreen.

Step 10

  • To reassemble your device, follow these instructions in reverse order.
  • .
  • Did you do it successfully?
  • Please SUBSCRIBE to my channel ツ

To reassemble your device, follow these instructions in reverse order.

.

Did you do it successfully?

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.

Author

                    ZFix

Member since: 12/09/2013

187,195 Reputation

                                      330 Guides authored                  



                       Badges:
                       35







                                                        +32 more badges

Team

                       Master Techs                        

                                                  Member of Master Techs 



                    Community                     


                                            310 Members                     


                                            1,168 Guides authored

Yogendra Singh - Sep 4, 2019

Reply

Sir

Please help

Mera phone SONY C1504

Display connector kharab ho gya

Hai new mil sakta hai

Jo PCB main hota hai