Difficulty
Difficult
Steps
10
Time Required
20 - 25 minutes
Sections
1
- LCD Display
- 10 steps
Flags
Member-Contributed Guide
An awesome member of our community made this guide. It is not managed by iFixit staff.
BackSony Xperia E C1505 C1504
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
Please SUBSCRIBE to my channel ツ
What you need
Video Overview
Step 1
LCD Display
- Switch-off the phone and remove the battery.
Switch-off the phone and remove the battery.
1024
Step 2
- The small bottom bezel is held by 2x locking clips.
- Preferably use plastic tools for disassembling.
The small bottom bezel is held by 2x locking clips.
Preferably use plastic tools for disassembling.
Step 3
- There are 4x silver screws and 3x black screws.
- The rear cover is held by 5x locking clips.
- Two of them, at the bottom side are more hard for unlocking. You can use a screwdriver or other metal tool to unlock them.
There are 4x silver screws and 3x black screws.
The rear cover is held by 5x locking clips.
Two of them, at the bottom side are more hard for unlocking. You can use a screwdriver or other metal tool to unlock them.
Step 4
- Remove the back cover.
- With a plastic tool disconnect one by one:
- LCD Display flex cable
- Touchscreen flex cable
- Menu Buttons Board flex cable
- Coaxial Wire Antenna cable
Remove the back cover.
With a plastic tool disconnect one by one:
LCD Display flex cable
Touchscreen flex cable
Menu Buttons Board flex cable
Coaxial Wire Antenna cable
Step 5
- Carefully remove the main board.
Carefully remove the main board.
Step 6
- Disconnect the other side of the flex cable and remove the Home Buttons board.
- Unstick the camera button.
Disconnect the other side of the flex cable and remove the Home Buttons board.
Unstick the camera button.
Step 7
- The touch screen is stuck to the frame with double side adhesive tape.
- By using plastic tools gently start separating.
- At the bottom is glued on firmly because the bonded surface is larger.
- Use a hot air to make separating more easy and safety.
The touch screen is stuck to the frame with double side adhesive tape.
By using plastic tools gently start separating.
At the bottom is glued on firmly because the bonded surface is larger.
Use a hot air to make separating more easy and safety.
Step 8
- With a plastic tool, carefully separate the LCD display from the touch screen.
- Clear the LCD Display from the old adhesive tape.
With a plastic tool, carefully separate the LCD display from the touch screen.
Clear the LCD Display from the old adhesive tape.
Step 9
- Install the new LCD into the frame and put adhesive tape. Be careful not to cover the holes (for the speaker, menu buttons etc.).
- Install the Touchscreen.
Install the new LCD into the frame and put adhesive tape. Be careful not to cover the holes (for the speaker, menu buttons etc.).
Install the Touchscreen.
Step 10
- To reassemble your device, follow these instructions in reverse order.
- .
- Did you do it successfully?
- Please SUBSCRIBE to my channel ツ
To reassemble your device, follow these instructions in reverse order.
.
Did you do it successfully?
Cancel: I did not complete this guide.
2 other people completed this guide.
Author
ZFix
Member since: 12/09/2013
187,195 Reputation
330 Guides authored
Badges:
35
+32 more badges
Team
Master Techs
Member of Master Techs
Community
310 Members
1,168 Guides authored