Sony Xdr S50 Dab Radio Dab Module Removal Repair Guide

Difficulty

Moderate

Steps

Time Required

                          30 minutes

Sections

Sony XDR-S50 DAB Radio Disassembly
5 steps
Sony XDR-S50 DAB Radio DAB Module Removal
2 steps

Flags

Member-Contributed Guide

An awesome member of our community made this guide. It is not managed by iFixit staff.

BackSony XDR-S50 DAB Radio
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications

Step 1

              Opening the case

Remove the batteries.
Remove 4 cross-head screws from the rear of the case and a fifth in the battery compartment.
The back should now lift off.
A wire is still connecting the aerial to the main circuit board. Do not strain it unduly.

Remove the batteries.

Remove 4 cross-head screws from the rear of the case and a fifth in the battery compartment.

The back should now lift off.

A wire is still connecting the aerial to the main circuit board. Do not strain it unduly.

1024

Step 2

              Disconnecting the aerial

Remove the aerial retaining screw.
Lift the aerial slightly in order to release the aerial connecting tag. You can now put the case rear cover aside.

Remove the aerial retaining screw.

Lift the aerial slightly in order to release the aerial connecting tag. You can now put the case rear cover aside.

Step 3

              Removing the knobs

Pull off the volume knob.
To remove the tuning knob, gently prise it off with a jimmy.
Under the tuning knob you will see a spring. Note its position for reassembly and remove it, taking care it doesn’t take flight.

Pull off the volume knob.

To remove the tuning knob, gently prise it off with a jimmy.

Under the tuning knob you will see a spring. Note its position for reassembly and remove it, taking care it doesn’t take flight.

Step 4

              Releasing the midframe

Unsolder the two wires connecting to the loud speaker. (This is not essential but will save you from straining these wires.)
Remove 2 screws from the grey midframe, one on the lower right on the battey connector and the other on the upper left above the tuning knob.
Release the two cables from their retaining clips under the battery compartment.

Unsolder the two wires connecting to the loud speaker. (This is not essential but will save you from straining these wires.)

Remove 2 screws from the grey midframe, one on the lower right on the battey connector and the other on the upper left above the tuning knob.

Release the two cables from their retaining clips under the battery compartment.

Step 5

              Removing the midframe

Lift the grey battery connector slightly to disengage a bush where you removed a screw in the previous step. (On reassembly, ensure this is snapped back in place.)
Ease the power and headphone sockets out of their holes in the case, using a spudger or similar tool.
You can now lift the midframe and attached assemblies out of the case, first lifting the right hand side by the power and headphone sockets, and hence withdrawing the volume and tuning spindles from the left hand side.
Before reassembly it’s worth dusting the LCD display and the inside of the display window.

Lift the grey battery connector slightly to disengage a bush where you removed a screw in the previous step. (On reassembly, ensure this is snapped back in place.)

Ease the power and headphone sockets out of their holes in the case, using a spudger or similar tool.

You can now lift the midframe and attached assemblies out of the case, first lifting the right hand side by the power and headphone sockets, and hence withdrawing the volume and tuning spindles from the left hand side.

Before reassembly it’s worth dusting the LCD display and the inside of the display window.

Step 6

              Sony XDR-S50 DAB Radio DAB Module Removal

Unsolder the connection on thecircuit board to the DAB tuner module below.
Remove two screws marked on the circuit board (marked on the board with arrows).
The circuit board is attached to the DAB radio module beneath by a multi-way connector. Gently lift the right hand side of the board in order to release it.
The DAB radio module will now simply lift out.

Unsolder the connection on thecircuit board to the DAB tuner module below.

Remove two screws marked on the circuit board (marked on the board with arrows).

The circuit board is attached to the DAB radio module beneath by a multi-way connector. Gently lift the right hand side of the board in order to release it.

The DAB radio module will now simply lift out.

Step 7

You can now inspect the DAB module.

You can now inspect the DAB module.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 1 other contributor

                    Philip Le Riche

Member since: 02/18/2014

27,989 Reputation

                                      45 Guides authored                  



                       Badges:
                       45







                                                        +42 more badges

Team

                       Restart Project                        

                                                  Member of Restart Project 



                    Community                     


                                            16 Members                     


                                            269 Guides authored

Member-Contributed Guide#

Team#

Member-Contributed Guide

Team