Sony Walkman Nwz E438 Screen Replacement Repair Guide

Difficulty

Moderate

Steps

7

Time Required

Suggest a time??

Sections

2

• Disassembling Sony Walkman NWZ-E438
• 2 steps
• Screen
• 5 steps

Flags

0

• BackSony Walkman NWZ-E438

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

What you need

Step 1

              Disassembling Sony Walkman NWZ-E438               

• Unscrew the two screws on the back of the device using a Phillips PH000 screwdriver.
• Keep the Phillips PH000 screwdriver aside for further steps in the guide. It will be the only screwdriver needed for this replacement.

Unscrew the two screws on the back of the device using a Phillips PH000 screwdriver.

Keep the Phillips PH000 screwdriver aside for further steps in the guide. It will be the only screwdriver needed for this replacement.

1024

Step 2

• Use a small prying tool to carefully pry open the back of the device.

Use a small prying tool to carefully pry open the back of the device.

Step 3

              Screen               

• Pull up the 2 copper strips connecting the outside of the device to the inside of the device.

Pull up the 2 copper strips connecting the outside of the device to the inside of the device.

Step 4

• Using the small, plastic prying tool wedge it between the bottom of the frame and the outer frame.
• Slowly circle the device, popping the outside of the frame off.

Using the small, plastic prying tool wedge it between the bottom of the frame and the outer frame.

Slowly circle the device, popping the outside of the frame off.

Step 5

• To remove the screen, use the fine point tweezers and lift up on the metal piece at the bottom of the frame.

To remove the screen, use the fine point tweezers and lift up on the metal piece at the bottom of the frame.

Step 6

• To remove screen from metal backing, use fine point tweezers to go in between the screen and metal backing and slowly pull them apart.

To remove screen from metal backing, use fine point tweezers to go in between the screen and metal backing and slowly pull them apart.

Step 7

• The screen will be removed.

The screen will be removed.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 3 other contributors 

                    Cheryl Zinn                     

Member since: 10/08/2015

525 Reputation

                                      5 Guides authored                  



                       Badges:
                       12







                                                        +9 more badges                           

Team

                       Eastern Washington University, Team 2-5, Plummer Fall 2015                        

                                                  Member of Eastern Washington University, Team 2-5, Plummer Fall 2015 



                    EWU-PLUMMER-F15S2G5                     


                                            4 Members                     


                                            6 Guides authored