Difficulty

Moderate

Steps

10

Time Required

                          20 minutes

Sections

2

  • Keyboard
  • 4 steps
  • RAM
  • 6 steps

Flags

1

Member-Contributed Guide

An awesome member of our community made this guide. It is not managed by iFixit staff.

  • BackSony Vaio VPCW211AX

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Keyboard
  • Start with the laptop face up on a flat surface.

Start with the laptop face up on a flat surface.

1024

Step 2

  • Open the laptop with the keyboard facing you.

Open the laptop with the keyboard facing you.

Step 3

  • Use a plastic opening tool to pry up the keyboard. Start at the end closest to the screen.
  • Be careful around the edges; work your way around the keyboard until all of it is detached.
  • There will be a ribbon cable attached to the bottom of the keyboard. Be sure not to rip the cable when lifting the keyboard from the laptop frame.

Use a plastic opening tool to pry up the keyboard. Start at the end closest to the screen.

Be careful around the edges; work your way around the keyboard until all of it is detached.

There will be a ribbon cable attached to the bottom of the keyboard. Be sure not to rip the cable when lifting the keyboard from the laptop frame.

Step 4

  • Carefully detach the ribbon from the base of the computer with your hands.
  • Remove the keyboard.

Carefully detach the ribbon from the base of the computer with your hands.

Remove the keyboard.

Step 5

              RAM
  • Use a Philips #0 screwdriver to remove the 7 top case screws.

Use a Philips #0 screwdriver to remove the 7 top case screws.

Step 6

  • Using a metal spudger, pry open at the seams.
  • Open the gray top of the laptop from the base black portion.
  • Slide the spudger along the seam, and then carefully open the top.

Using a metal spudger, pry open at the seams.

Open the gray top of the laptop from the base black portion.

Slide the spudger along the seam, and then carefully open the top.

Step 7

  • Open the top carefully without disconnecting the two parts.
  • Be mindful and careful of the ribbon cable attaching the two parts together.

Open the top carefully without disconnecting the two parts.

Be mindful and careful of the ribbon cable attaching the two parts together.

Step 8

  • Using your fingers, pry apart the two side metal pieces that hold the part in place as shown on the picture.

Using your fingers, pry apart the two side metal pieces that hold the part in place as shown on the picture.

Step 9

  • After that step, the RAM should pop up on its own as shown in the picture.

After that step, the RAM should pop up on its own as shown in the picture.

Step 10

  • Carefully press the sides near the right edge of the part and remove it from it’s base.

Carefully press the sides near the right edge of the part and remove it from it’s base.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 2 other contributors 


                    Giselle Dougan

Member since: 01/31/2018

760 Reputation

                                      5 Guides authored                  



                       Badges:
                       9







                                                        +6 more badges

Samuel Gottschall - Apr 15, 2020

Reply

I have a 21212L and you have to remove the screws under the flap to remove the keyboard firstm you also do not have to remove the top assembly at all.