Difficulty
Difficult
Steps
11
Time Required
20 minutes
Sections
2
- Keyboard
- 4 steps
- Fan
- 7 steps
Flags
1
Member-Contributed Guide
An awesome member of our community made this guide. It is not managed by iFixit staff.
BackSony Vaio VPCW211AX
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Keyboard
- Start with the laptop face up on a flat surface.
Start with the laptop face up on a flat surface.
1024
Step 2
- Open the laptop with the keyboard facing you.
Open the laptop with the keyboard facing you.
Step 3
- Use a plastic opening tool to pry up the keyboard. Start at the end closest to the screen.
- Be careful around the edges; work your way around the keyboard until all of it is detached.
- There will be a ribbon cable attached to the bottom of the keyboard. Be sure not to rip the cable when lifting the keyboard from the laptop frame.
Use a plastic opening tool to pry up the keyboard. Start at the end closest to the screen.
Be careful around the edges; work your way around the keyboard until all of it is detached.
There will be a ribbon cable attached to the bottom of the keyboard. Be sure not to rip the cable when lifting the keyboard from the laptop frame.
Step 4
- Carefully detach the ribbon from the base of the computer with your hands.
- Remove the keyboard.
Carefully detach the ribbon from the base of the computer with your hands.
Remove the keyboard.
Step 5
Fan
- Use a Philips #0 screwdriver to remove the 7 top case screws.
Use a Philips #0 screwdriver to remove the 7 top case screws.
Step 6
- Using a metal spudger, pry open at the seams.
- Open the gray top of the laptop from the base black portion.
- Slide the spudger along the seam, and then carefully open the top.
Using a metal spudger, pry open at the seams.
Open the gray top of the laptop from the base black portion.
Slide the spudger along the seam, and then carefully open the top.
Step 7
- Open the top carefully without disconnecting the two parts.
- Be mindful and careful of the ribbon cable attaching the two parts together.
Open the top carefully without disconnecting the two parts.
Be mindful and careful of the ribbon cable attaching the two parts together.
Step 8
- Use a Philips #0 screwdriver to unscrew the 4 heatsink screws.
Use a Philips #0 screwdriver to unscrew the 4 heatsink screws.
Step 9
- If there is electrical tape, remove it with your finger.
If there is electrical tape, remove it with your finger.
Step 10
- Using the plastic opening tool, pry up the unscrewed fan.
Using the plastic opening tool, pry up the unscrewed fan.
Step 11
- The fan will still be attached by a small red and yellow wire, with your fingers detach this carefully.
- Remove the fan.
The fan will still be attached by a small red and yellow wire, with your fingers detach this carefully.
Remove the fan.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
One other person completed this guide.
Author
with 3 other contributors
Giselle Dougan
Member since: 01/31/2018
760 Reputation
5 Guides authored
Badges:
9
+6 more badges