Difficulty
Easy
Steps
4
Time Required
30 seconds
Sections
2
- Battery
- 2 steps
- Optical Drive
- 2 steps
Flags
0
BackSony Vaio VPCEG37FM
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Battery
- Unlock the battery by sliding the lock upwards.
Unlock the battery by sliding the lock upwards.
1024
Step 2
- Slide the release upwards and lift out the battery to remove.
- Once battery is removed, long press the Power button for 30-60s and discharge any remaining power inside of the computer.
- Put on the ESD bracelet, making sure the metal circle is touching your skin. Remove the alligator clip from the other end of the bracelet and insert the jack into the ground plug of an active electrical outlet. (the round hole). Do not move forward until you are grounded.
Slide the release upwards and lift out the battery to remove.
Once battery is removed, long press the Power button for 30-60s and discharge any remaining power inside of the computer.
Put on the ESD bracelet, making sure the metal circle is touching your skin. Remove the alligator clip from the other end of the bracelet and insert the jack into the ground plug of an active electrical outlet. (the round hole). Do not move forward until you are grounded.
Step 3
Optical Drive
- Using the Phillips #1 screwdriver, unscrew the 6.5 mm screw.
Using the Phillips #1 screwdriver, unscrew the 6.5 mm screw.
Step 4
- Grab and slide out the optical drive to remove.
Grab and slide out the optical drive to remove.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
with 3 other contributors
Ramon Ogaz
Member since: 09/25/2017
104 Reputation
1 Guide authored
Badges:
3
Team
University of North Texas, Team S3-G4, Thompson Fall 2017
Member of University of North Texas, Team S3-G4, Thompson Fall 2017
UNT-THOMPSON-F17S3G4
4 Members
12 Guides authored