Difficulty

Easy

Steps

5

Time Required

                          1 - 4 minutes            

Sections

2

  • Battery
  • 2 steps
  • Hard Drive
  • 3 steps

Flags

0

  • BackSony Vaio VPCEG37FM

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Battery               
  • Unlock the battery by sliding the lock upwards.

Unlock the battery by sliding the lock upwards.

1024

Step 2

  • Slide the release upwards and lift out the battery to remove.
  • Once battery is removed, long press the Power button for 30-60s and discharge any remaining power inside of the computer.
  • Put on the ESD bracelet, making sure the metal circle is touching your skin. Remove the alligator clip from the other end of the bracelet and insert the jack into the ground plug of an active electrical outlet. (the round hole). Do not move forward until you are grounded.

Slide the release upwards and lift out the battery to remove.

Once battery is removed, long press the Power button for 30-60s and discharge any remaining power inside of the computer.

Put on the ESD bracelet, making sure the metal circle is touching your skin. Remove the alligator clip from the other end of the bracelet and insert the jack into the ground plug of an active electrical outlet. (the round hole). Do not move forward until you are grounded.

Step 3

              Hard Drive               
  • Using a Phillips #1 screwdriver, remove the 2 6.5mm screws around the hard drive case.
  • The screws are attached to the hard drive case.

Using a Phillips #1 screwdriver, remove the 2 6.5mm screws around the hard drive case.

The screws are attached to the hard drive case.

Step 4

  • Gently remove the hard drive case to expose the actual hard drive.
  • Be sure that the two screws are completely unscrewed before removing to not damage any of the parts.

Gently remove the hard drive case to expose the actual hard drive.

Be sure that the two screws are completely unscrewed before removing to not damage any of the parts.

Step 5

  • To remove the hard drive, slide the hard drive forward and lift up.
  • The hard drive should come out easily with little to no resistance.

To remove the hard drive, slide the hard drive forward and lift up.

The hard drive should come out easily with little to no resistance.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 2 other contributors 

                    Nicholas Nguyen                     

Member since: 09/26/2017

106 Reputation

                                      1 Guide authored                  



                       Badges:
                       5







                                                        +2 more badges                           

Team

                       University of North Texas, Team S3-G4, Thompson Fall 2017                        

                                                  Member of University of North Texas, Team S3-G4, Thompson Fall 2017 



                    UNT-THOMPSON-F17S3G4                     


                                            4 Members                     


                                            12 Guides authored