Difficulty
Moderate
Steps
7
Time Required
5 minutes
Sections
2
- Battery
- 4 steps
- RAM
- 3 steps
Flags
0
BackSony Vaio VPCEG26FX
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Battery
- Flip the laptop so the bottom is facing up with the model number visible.
Flip the laptop so the bottom is facing up with the model number visible.
1024
Step 2
- Slide the lock switch down until you hear a click to unlock the battery.
Slide the lock switch down until you hear a click to unlock the battery.
Step 3
- Slide the release slider up and simultaneously push the battery upwards away from the device until it falls out of place.
Slide the release slider up and simultaneously push the battery upwards away from the device until it falls out of place.
Step 4
- Remove the battery from the battery compartment.
Remove the battery from the battery compartment.
Step 5
RAM
- After you remove the battery, there is a small rectangular panel underneath where the battery was housed.
After you remove the battery, there is a small rectangular panel underneath where the battery was housed.
Step 6
- Remove the single screw holding the panel in place using the JIS #0 screwdriver.
Remove the single screw holding the panel in place using the JIS #0 screwdriver.
Step 7
- Remove the green circuit board by dislodging the circuit it is attached to.
- Unhook it and remove it from the device.
Remove the green circuit board by dislodging the circuit it is attached to.
Unhook it and remove it from the device.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
with 4 other contributors
Sara Alfaro
Member since: 03/08/2019
531 Reputation
5 Guides authored
Badges:
5
+2 more badges
Team
UMass Dartmouth, Team S1-G4, Botvin Spring 2019
Member of UMass Dartmouth, Team S1-G4, Botvin Spring 2019
UMASSD-BOTVIN-S19S1G4
4 Members
10 Guides authored