Difficulty
Moderate
Steps
11
Time Required
Suggest a time??
Sections
4
- Battery
- 3 steps
- RAM
- 2 steps
- Hard Drive
- 4 steps
- Audio Card
- 2 steps
Flags
2
Markup Mishap
This guide needs better markups. Help out by correcting or making some markup annotations.
Better Introduction
Improve this guide by completing or revising its introduction.
BackSony Vaio VPCEB11FM
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
What you need
Step 1
Battery
- Power down and disconnect the laptop from power supply.
- Using your fingers, unlock the tab by pushing on the slide.
Power down and disconnect the laptop from power supply.
Using your fingers, unlock the tab by pushing on the slide.
1024
Step 2
- While holding the release slide, use your thumb to lift the lip of the battery to pull it out.
While holding the release slide, use your thumb to lift the lip of the battery to pull it out.
Step 3
- Pull the battery out.
Pull the battery out.
Step 4
RAM
- Unscrew the RAM cover plate using the Phillips #1 Screwdriver.
- Once the cover has been loosened, pry the cover with your finger for it to come off.
Unscrew the RAM cover plate using the Phillips #1 Screwdriver.
Once the cover has been loosened, pry the cover with your finger for it to come off.
Step 5
- Use your fingers to gently pull the white plastic strip outward on both sides.
- Once you pull the strip, the strip of RAM will loosen up. Once loose the strip of RAM should lift out.
- Once done with the top strip of RAM continue for all continuous strips.
Use your fingers to gently pull the white plastic strip outward on both sides.
Once you pull the strip, the strip of RAM will loosen up. Once loose the strip of RAM should lift out.
Once done with the top strip of RAM continue for all continuous strips.
Step 6
Hard Drive
- Using the Phillips #01 Screwdriver, remove the two 7mm screws.
Using the Phillips #01 Screwdriver, remove the two 7mm screws.
Step 7
- Use your fingers to pry the cover upward.
- Unscrew the two 7mm screws.
- Pull the plastic tab in the direction of the arrow to take out.
Use your fingers to pry the cover upward.
Unscrew the two 7mm screws.
Pull the plastic tab in the direction of the arrow to take out.
Step 8
- Lift plug side first.
- Remove all the way.
Lift plug side first.
Remove all the way.
Step 9
- Skip to next step if accessing other components.
- Remove the 3mm screws with the Phillips #1 Screwdriver from hard drive bracket.
Skip to next step if accessing other components.
Remove the 3mm screws with the Phillips #1 Screwdriver from hard drive bracket.
Step 10
Audio Card
- #1 Unscrew the back panel
- #2 Then work the tool around the sides to release cover. You may need a second tool to help keep your loose corner open.
#1 Unscrew the back panel
#2 Then work the tool around the sides to release cover. You may need a second tool to help keep your loose corner open.
Step 11
- Unscrew the screw with the size of * screw driver
- Left up the case holder
- Gently pull the connective cable
Unscrew the screw with the size of * screw driver
Left up the case holder
Gently pull the connective cable
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
2 other people completed this guide.
Author
with 3 other contributors
Maxine Filcher
Member since: 01/30/2017
1,090 Reputation
8 Guides authored
Badges:
15
+12 more badges
Team
UW Tacoma, Team 1-5, Rose Winter 2017
Member of UW Tacoma, Team 1-5, Rose Winter 2017
UWT-ROSE-W17S1G5
4 Members
16 Guides authored
