Difficulty
Easy
Steps
6
Time Required
2 - 5 minutes
Sections
2
- Battery
- 3 steps
- RAM Card
- 3 steps
Flags
0
BackSony Vaio VPC-Y2190X
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Battery
- Flip your laptop so that the bottom is facing up.
Flip your laptop so that the bottom is facing up.
1024
Step 2
- Slide the “Lock” switch to the right.
- Slide and hold the “Release” switch to the left.
Slide the “Lock” switch to the right.
Slide and hold the “Release” switch to the left.
Step 3
- While holding the “Release” switch, lift the lip of the battery.
- Lift the battery up and out of the laptop.
While holding the “Release” switch, lift the lip of the battery.
Lift the battery up and out of the laptop.
Step 4
RAM Card
- Use a #0PH screwdriver to unscrew the three 4.80mm screws.
- Remove the panel.
Use a #0PH screwdriver to unscrew the three 4.80mm screws.
Remove the panel.
Step 5
- Pull the metal tabs in opposite directions, away from the RAM card.
- The RAM card will swing upwards.
Pull the metal tabs in opposite directions, away from the RAM card.
The RAM card will swing upwards.
Step 6
- Grab the RAM card from its center.
- Gently pull the RAM card out.
Grab the RAM card from its center.
Gently pull the RAM card out.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
One other person completed this guide.
Author
with 3 other contributors
Kris Fleming
Member since: 01/31/2019
273 Reputation
2 Guides authored
Badges:
6
+3 more badges
Team
Appalachian State University, Team S1-G1, Menagarishvili Spring 2019
Member of Appalachian State University, Team S1-G1, Menagarishvili Spring 2019
APSU-MENAGARISHVILI-S19S1G1
3 Members
10 Guides authored