Difficulty
Easy
Steps
6
Time Required
2 - 5 minutes
Sections
2
- Battery
- 3 steps
- Hard Drive
- 3 steps
Flags
0
BackSony Vaio VPC-Y2190X
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Battery
- Flip your laptop so that the bottom is facing up.
Flip your laptop so that the bottom is facing up.
1024
Step 2
- Slide the “Lock” switch to the right.
- Slide and hold the “Release” switch to the left.
Slide the “Lock” switch to the right.
Slide and hold the “Release” switch to the left.
Step 3
- While holding the “Release” switch, lift the lip of the battery.
- Lift the battery up and out of the laptop.
While holding the “Release” switch, lift the lip of the battery.
Lift the battery up and out of the laptop.
Step 4
Hard Drive
- Using a #0PH screwdriver, unscrew the three 4.80mm screws on the back of the device.
- The screws are held into the panel by washers, they will not fall out once unscrewed.
Using a #0PH screwdriver, unscrew the three 4.80mm screws on the back of the device.
The screws are held into the panel by washers, they will not fall out once unscrewed.
Step 5
- Remove the panel.
- Use the #0PH screwdriver to remove the four 3.61mm screws.
Remove the panel.
Use the #0PH screwdriver to remove the four 3.61mm screws.
Step 6
- Carefully lift the hard drive.
- Remove the hard drive by pulling it to the left.
Carefully lift the hard drive.
Remove the hard drive by pulling it to the left.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
One other person completed this guide.
Author
with 4 other contributors
Kris Fleming
Member since: 01/31/2019
273 Reputation
2 Guides authored
Badges:
6
+3 more badges
Team
Appalachian State University, Team S1-G1, Menagarishvili Spring 2019
Member of Appalachian State University, Team S1-G1, Menagarishvili Spring 2019
APSU-MENAGARISHVILI-S19S1G1
3 Members
10 Guides authored
