Difficulty

Moderate

Steps

22

Time Required

Suggest a time??

Sections

4

  • Battery
  • 3 steps
  • Hard Drive
  • 6 steps
  • RAM
  • 3 steps
  • Keyboard
  • 10 steps

Flags

7

Needs Better Images

Better photos will improve this guide. Help out by taking, editing, or uploading new ones!

Step Trimmer

This guide has unnecessary steps. Trim them to be more concise!

Inconsistent Images

Updating the images on this guide to be more consistent with the prerequisites would increase its awesomeness.

Bullets!

Better coordination with markups and the color/type of bullets will help make this guide more clear!

Mismatched Prerequisites

This guide does not have a proper prerequisite guide. Help match it to its ideal partner by finding it or writing one!

Markup Mishap

This guide needs better markups. Help out by correcting or making some markup annotations.

Slice and Dice

The steps in this guide should be split up and made into a series of prerequisite guides.

  • BackSony VAIO VPC-EB33FM

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Battery
  • Power down the laptop by pressing the power button.
  • Turn the laptop onto its backside.

Power down the laptop by pressing the power button.

Turn the laptop onto its backside.

1024

Step 2

  • To release the battery, hold both the release button and the unlock button at the same time.

To release the battery, hold both the release button and the unlock button at the same time.

Step 3

  • Remove the battery out from the notch while continuing to hold the release button.

Remove the battery out from the notch while continuing to hold the release button.

Step 4

              Hard Drive
  • Use a Phillips #00 screwdriver to remove the two 7.8 mm cover screws on the bottom corners of the panel.

Use a Phillips #00 screwdriver to remove the two 7.8 mm cover screws on the bottom corners of the panel.

Step 5

  • Use a finger/fingernail to grip the notch at the bottom of the panel to lift it off.
  • You may need to use your other hand to safely remove the panel.
  • You can also use a spudger for this step.

Use a finger/fingernail to grip the notch at the bottom of the panel to lift it off.

You may need to use your other hand to safely remove the panel.

You can also use a spudger for this step.

Step 6

  • Remove the two remaining 7.8 mm screws using the Phillips #00 screwdriver.

Remove the two remaining 7.8 mm screws using the Phillips #00 screwdriver.

Step 7

  • Grab the tab between your thumb and index finger.
  • Hold the hard drive securely in a horizontal position using your other hand.
  • Push the hard drive to the left using the plastic tab to disconnect it from the laptop.
  • To prevent damage of the connection on the hard disk drive or the laptop, perform this task slowly and with care.

Grab the tab between your thumb and index finger.

Hold the hard drive securely in a horizontal position using your other hand.

Push the hard drive to the left using the plastic tab to disconnect it from the laptop.

To prevent damage of the connection on the hard disk drive or the laptop, perform this task slowly and with care.

Step 8

  • While still holding the plastic tab, lift the right side of the hard drive out at a 45º angle.
  • Pull the hard drive out.

While still holding the plastic tab, lift the right side of the hard drive out at a 45º angle.

Pull the hard drive out.

Step 9

  • If you need to remove the bracket from the hard drive, follow the next few steps:
  • Remove the two 3.7 mm screws from either side of the bracket with a Phillips #00 screwdriver.
  • Lift the bracket off the hard drive.

If you need to remove the bracket from the hard drive, follow the next few steps:

Remove the two 3.7 mm screws from either side of the bracket with a Phillips #00 screwdriver.

Lift the bracket off the hard drive.

Step 10

              RAM
  • Remove the one screw with a Phillips #00 screwdriver.
  • The screw cannot be removed from the RAM casing cover.

Remove the one screw with a Phillips #00 screwdriver.

The screw cannot be removed from the RAM casing cover.

Step 11

  • Pull the two retaining arms away from the center of the RAM chip.
  • The RAM will make a “pop” sound and the RAM stick will rise for ease of handling.

Pull the two retaining arms away from the center of the RAM chip.

The RAM will make a “pop” sound and the RAM stick will rise for ease of handling.

Step 12

  • Pull the RAM stick out of its socket.
  • To remove the second stick of RAM, repeat steps six and seven.
  • When installing RAM, make sure sticks are firmly in place or the computer will not register them.

Pull the RAM stick out of its socket.

To remove the second stick of RAM, repeat steps six and seven.

When installing RAM, make sure sticks are firmly in place or the computer will not register them.

Step 13

              Keyboard
  • Using a Phillips #00 screwdriver remove the following screws securing the back cover :
  • Two 3.8-mm screws
  • Two 8.9-mm screws
  • Twelve 7.75-mm screws

Using a Phillips #00 screwdriver remove the following screws securing the back cover :

Two 3.8-mm screws

Two 8.9-mm screws

Twelve 7.75-mm screws

Step 14

  • Check to make sure all screws have been removed.
  • Using both hands separate the back cover by lifting from the back and working around the perimeter to release tabs.

Check to make sure all screws have been removed.

Using both hands separate the back cover by lifting from the back and working around the perimeter to release tabs.

Step 15

  • Uninstalling the keyboard may require a second set of hands.
  • During the removal of the back cover, a screw that attaches the optical drive to the laptop is also taken out. This means the optical drive is ready to be removed.
  • Remove the optical drive by sliding it out.

Uninstalling the keyboard may require a second set of hands.

During the removal of the back cover, a screw that attaches the optical drive to the laptop is also taken out. This means the optical drive is ready to be removed.

Remove the optical drive by sliding it out.

Step 16

  • Once the optical drive is removed, locate the keyboard ejection button and press down on it until you hear a snap.
  • Once you hear this sound, it means that a section of the keyboard has been ejected.

Once the optical drive is removed, locate the keyboard ejection button and press down on it until you hear a snap.

Once you hear this sound, it means that a section of the keyboard has been ejected.

Step 17

  • Turn the laptop onto its frontside and unfold the laptop so the keyboard is fully visible.
  • Locate the area where the section of the keyboard was ejected.

Turn the laptop onto its frontside and unfold the laptop so the keyboard is fully visible.

Locate the area where the section of the keyboard was ejected.

Step 18

  • Start to pry out the keyboard with your hands.
  • Be careful not to break any of the hooks that attach the keyboard to the laptop.
  • If it seems difficult to remove the keyboard with your hands, then use a plastic opening tool.

Start to pry out the keyboard with your hands.

Be careful not to break any of the hooks that attach the keyboard to the laptop.

If it seems difficult to remove the keyboard with your hands, then use a plastic opening tool.

Step 19

  • Remain cautious to not break the hooks.
  • Continue all the way around the keyboard until you can detach it from the laptop.

Remain cautious to not break the hooks.

Continue all the way around the keyboard until you can detach it from the laptop.

Step 20

  • Do not immediately pull the keyboard away from the laptop. There is still an attachment between the keyboard and laptop.
  • Turn the keyboard on its face and locate the green tape and the ribbon attachment.
  • Using the metal tweezer, remove only the green sticker.
  • Place the sticker at any location as long as you remember to use it for installing the keyboard.

Do not immediately pull the keyboard away from the laptop. There is still an attachment between the keyboard and laptop.

Turn the keyboard on its face and locate the green tape and the ribbon attachment.

Using the metal tweezer, remove only the green sticker.

Place the sticker at any location as long as you remember to use it for installing the keyboard.

Step 21

  • Locate the black retaining arms.
  • Using the plastic opening tool, pull the retaining arms out.
  • The retaining arms will not come off completely.

Locate the black retaining arms.

Using the plastic opening tool, pull the retaining arms out.

The retaining arms will not come off completely.

Step 22

  • It is safe to touch the ribbon attachment.
  • Lift the retaining arms with the plastic opening tool at an angle so that the ribbon attachment can be pulled out.

It is safe to touch the ribbon attachment.

Lift the retaining arms with the plastic opening tool at an angle so that the ribbon attachment can be pulled out.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      10 other people completed this guide.

Author

                                      with 9 other contributors 


                    Kevin

Member since: 01/11/2013

513 Reputation

                                      3 Guides authored                  



                       Badges:
                       12







                                                        +9 more badges

Team

                       Cal Poly, Team 18-39, Regan Winter 2013                        

                                                  Member of Cal Poly, Team 18-39, Regan Winter 2013 



                    CPSU-REGAN-W13S18G39                     


                                            5 Members                     


                                            15 Guides authored