Featured
Featured Guide
Difficulty
Moderate
Steps
14
Time Required
10 minutes
Sections
3
- Battery
- 3 steps
- Keyboard
- 5 steps
- Hard Disk Drive
- 6 steps
Flags
2
Needs Better Images
Better photos will improve this guide. Help out by taking, editing, or uploading new ones!
Featured Guide
This guide has been found to be exceptionally cool by the iFixit staff.
BackSony Vaio VGN-TXN25N
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
What you need
Step 1
Battery
- Flip the computer so that the bottom is facing up.
- Look to the long edge where the computer screen is hinged and find the “release slide”. It is located at the top left corner of the square indent.
Flip the computer so that the bottom is facing up.
Look to the long edge where the computer screen is hinged and find the “release slide”. It is located at the top left corner of the square indent.
1024
Step 2
- Use your finger to slide the release to the left.
Use your finger to slide the release to the left.
Step 3
- While holding the release slide with one hand, use your opposite hand to pull the battery from its slot by gently shaking the battery left and right to help slide it out.
While holding the release slide with one hand, use your opposite hand to pull the battery from its slot by gently shaking the battery left and right to help slide it out.
Step 4
Keyboard
- Take out the screw in the center of the computer.
Take out the screw in the center of the computer.
Step 5
- Flip the computer right side up.
- Open screen so that keyboard is visible.
Flip the computer right side up.
Open screen so that keyboard is visible.
Step 6
- Use a plastic opening tool to gently lift the keyboard at a corner.
- Make sure you get below the keyboard itself and not just the keys.
- Slide the tool around the perimeter of the keyboard and it will start to lift.
Use a plastic opening tool to gently lift the keyboard at a corner.
Make sure you get below the keyboard itself and not just the keys.
Slide the tool around the perimeter of the keyboard and it will start to lift.
Step 7
- Do not pull the keyboard away from the computer. There is a ribbon cord attaching the keyboard to the computer.
- Once the keyboard has been lifted at a few edges, lift the keyboard with both hands.
Do not pull the keyboard away from the computer. There is a ribbon cord attaching the keyboard to the computer.
Once the keyboard has been lifted at a few edges, lift the keyboard with both hands.
Step 8
- Locate the ribbon cord behind the keyboard.
- Locate a brown clamp attaching the keyboard to the computer.
- Use a plastic opening tool to lift the clamp and release the cable.
- Now the keyboard can be pulled away entirely.
Locate the ribbon cord behind the keyboard.
Locate a brown clamp attaching the keyboard to the computer.
Use a plastic opening tool to lift the clamp and release the cable.
Now the keyboard can be pulled away entirely.
Step 9
Hard Disk Drive
- Take out the screw under the keyboard.
Take out the screw under the keyboard.
Step 10
- Flip computer over and remove the 6 screws.
Flip computer over and remove the 6 screws.
Step 11
- Flip computer over again and unclip the plastic cover.
- Do not be afraid to be rough, since the cover is hard to remove.
- Be sure to remove the case slowly and unclip any ribbon cords that are attached.
Flip computer over again and unclip the plastic cover.
Do not be afraid to be rough, since the cover is hard to remove.
Be sure to remove the case slowly and unclip any ribbon cords that are attached.
Step 12
- Locate the hard drive disk. The hard drive disk will be covered by a shiny lid.
- Unscrew the lid with a #00 Phillips Head Screwdriver.
- There are 3 screws holding it in.
- Grab the lid by one corner and pull off the lid.
Locate the hard drive disk. The hard drive disk will be covered by a shiny lid.
Unscrew the lid with a #00 Phillips Head Screwdriver.
There are 3 screws holding it in.
Grab the lid by one corner and pull off the lid.
Step 13
- Find the brown clip attached to the hard disk drive on the side facing the optical disk drive.
- Carefully pull out the brown clip with your fingers.
Find the brown clip attached to the hard disk drive on the side facing the optical disk drive.
Carefully pull out the brown clip with your fingers.
Step 14
- Hold the hard disk drive on the side where the brown clip was attached and lift it upwards to pull it out.
Hold the hard disk drive on the side where the brown clip was attached and lift it upwards to pull it out.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
6 other people completed this guide.
Author
with 6 other contributors
Jenny Wang
Member since: 04/03/2012
107 Reputation
1 Guide authored
Badges:
9
+6 more badges
Team
Cal Poly, Team 5-3, Forte Spring 2012
Member of Cal Poly, Team 5-3, Forte Spring 2012
CPSU-FORTE-S12S5G3
5 Members
12 Guides authored
lordsan32 - Nov 29, 2016
Reply
Muito bom, me ajudou muito…