Difficulty

Easy

Steps

6

Time Required

                          10 - 20 minutes

Sections

1

  • Display Screen
  • 6 steps

Flags

0

  • BackSony Vaio VGN-TXN25N

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Display Screen
  • Place the computer on a flat surface with the top facing up.
  • Open the screen.

Place the computer on a flat surface with the top facing up.

Open the screen.

1024

Step 2

  • Locate the rubber screw caps at the two bottom corners of the screen.
  • Use your finger to remove the rubber screw caps.

Locate the rubber screw caps at the two bottom corners of the screen.

Use your finger to remove the rubber screw caps.

Step 3

  • Locate the two screws, one on each bottom corner.
  • Unscrew the screws with a Phillips head size #0 screwdriver.
  • Keep track of the screws. They are small and easy to misplace.

Locate the two screws, one on each bottom corner.

Unscrew the screws with a Phillips head size #0 screwdriver.

Keep track of the screws. They are small and easy to misplace.

Step 4

  • Use a plastic opening tool to gently lift the plastic casing that borders the screen.
  • Pop off the casing by working the tool around the outside of it.
  • Wiggling the tool may be required. The casing could be fitted snugly.

Use a plastic opening tool to gently lift the plastic casing that borders the screen.

Pop off the casing by working the tool around the outside of it.

Wiggling the tool may be required. The casing could be fitted snugly.

Step 5

  • Carefully flip down the screen so it rests on the keyboard.
  • Locate the wire connector on the back of the screen and use a plastic opening tool to gently loosen the wire connection.

Carefully flip down the screen so it rests on the keyboard.

Locate the wire connector on the back of the screen and use a plastic opening tool to gently loosen the wire connection.

Step 6

  • Remove the screen.

Remove the screen.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.

Author

                                      with 4 other contributors 


                    Andrew Ricker

Member since: 04/04/2012

71 Reputation

                                      1 Guide authored                  



                       Badges:
                       7







                                                        +4 more badges

Team

                       Cal Poly, Team 5-3, Forte Spring 2012                        

                                                  Member of Cal Poly, Team 5-3, Forte Spring 2012 



                    CPSU-FORTE-S12S5G3                     


                                            5 Members                     


                                            12 Guides authored