Difficulty
Moderate
Steps
4
Time Required
Suggest a time??
Sections
2
- Battery
- 2 steps
- Memory
- 2 steps
Flags
Incorrect Tools
Help make this guide better by using the correct tools in images and/or text.
Missed a Step
Oops! This guide is currently missing some important steps.
BackSony VAIO VGN-SZ120P
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
Keep out of reach of children and pets.
DO NOT attempt to teardown or repair your device under the influence of drugs or alcohol.
DO NOT ingest any parts of the system.
Use the correct tools as stated in the tools section.
DO NOT touch any gold connectors on interior or exterior of the system.
Make sure system is unplugged before performing any maintenance on the system.
What you need
Step 1
Battery
- Set the computer display-side down.
- Unlock the battery by sliding the port-side latch to the ‘unlock’ position.
Set the computer display-side down.
Unlock the battery by sliding the port-side latch to the ‘unlock’ position.
1024
Step 2
- On the opposite side of the battery, press the release latch and slide the battery away from the main body to remove.
On the opposite side of the battery, press the release latch and slide the battery away from the main body to remove.
Step 3
Memory
- Unscrew the two memory panel screws and set the panel aside.
- Ignore the removal of the heatsink panel. This does not need to be removed for RAM module access.
Unscrew the two memory panel screws and set the panel aside.
Ignore the removal of the heatsink panel. This does not need to be removed for RAM module access.
Step 4
- Lift the film covering to reveal the memory module with the tweezers.
- Pull the tabs on both sides of the RAM away from the module. The module will pop up.
- Repeat this step for the other RAM module located directly above the memory module just removed.
Lift the film covering to reveal the memory module with the tweezers.
Pull the tabs on both sides of the RAM away from the module. The module will pop up.
Repeat this step for the other RAM module located directly above the memory module just removed.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
One other person completed this guide.
Author
with 8 other contributors
Ryan
Member since: 04/11/2010
154 Reputation
2 Guides authored
Badges:
9
+6 more badges
Team
Cal Poly, Team 25-89, Amido Spring 2010
Member of Cal Poly, Team 25-89, Amido Spring 2010
CPSU-AMIDO-S10S25G89
4 Members
63 Guides authored