Difficulty
Easy
Steps
6
Time Required
6 minutes
Sections
2
- Battery
- 2 steps
- RAM
- 4 steps
Flags
0
BackSony VAIO VGN-S260
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Battery
- Flip the laptop over so the Vaio logo is facing down.
- Locate the battery at the top and Find the release and unlock slides on the battery.
- Slide the unlock tab to the unlock position.
- Slide the release tab in the direction of the arrow, i.e. towards the unlock tab.
Flip the laptop over so the Vaio logo is facing down.
Locate the battery at the top and Find the release and unlock slides on the battery.
Slide the unlock tab to the unlock position.
Slide the release tab in the direction of the arrow, i.e. towards the unlock tab.
1024
Step 2
- With the tabs still in the unlock position, slide the battery away from the main case.
With the tabs still in the unlock position, slide the battery away from the main case.
Step 3
RAM
- With the laptop still flipped over with the Vaio logo facedown, locate the screws for the RAM
- Remove the screws
With the laptop still flipped over with the Vaio logo facedown, locate the screws for the RAM
Remove the screws
Step 4
- Lift off the unscrewed cover
- Locate the RAM
Lift off the unscrewed cover
Locate the RAM
Step 5
- Locate tabs next to RAM
- Pull the 2 tabs away from the RAM
- The RAM should pop up.
Locate tabs next to RAM
Pull the 2 tabs away from the RAM
The RAM should pop up.
Step 6
- Gently slide the RAM up and out
Gently slide the RAM up and out
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
with 3 other contributors
Jeffrey Bryan
Member since: 04/20/2010
552 Reputation
11 Guides authored
Badges:
15
+12 more badges
Team
Cal Poly, Team 16-4, Maness Spring 2010
Member of Cal Poly, Team 16-4, Maness Spring 2010
CPSU-MANESS-S10S16G4
4 Members
19 Guides authored