Difficulty

Moderate

Steps

15

Time Required

                          15 minutes

Sections

4

  • Battery
  • 2 steps
  • Keyboard
  • 4 steps
  • Upper Casing
  • 5 steps
  • Optical Drive
  • 4 steps

Flags

0

  • BackSony VAIO VGN-S260

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Battery
  • Flip the laptop over so the Vaio logo is facing down.
  • Locate the battery at the top and Find the release and unlock slides on the battery.
  • Slide the unlock tab to the unlock position.
  • Slide the release tab in the direction of the arrow, i.e. towards the unlock tab.

Flip the laptop over so the Vaio logo is facing down.

Locate the battery at the top and Find the release and unlock slides on the battery.

Slide the unlock tab to the unlock position.

Slide the release tab in the direction of the arrow, i.e. towards the unlock tab.

1024

Step 2

  • With the tabs still in the unlock position, slide the battery away from the main case.

With the tabs still in the unlock position, slide the battery away from the main case.

Step 3

              Keyboard
  • Flip the computer over so the Vaio logo is facedown.
  • Unscrew the 2 screws next to the battery.

Flip the computer over so the Vaio logo is facedown.

Unscrew the 2 screws next to the battery.

Step 4

  • Flip the computer over again so the Vaio logo is face up.
  • Open the lid.

Flip the computer over again so the Vaio logo is face up.

Open the lid.

Step 5

  • Press down on the outer gray shell around the keyboard.
  • Use the spudger to gently lift keyboard.
  • Do not pull up the keyboard too far as it is attached to a ribbon underneath.

Press down on the outer gray shell around the keyboard.

Use the spudger to gently lift keyboard.

Do not pull up the keyboard too far as it is attached to a ribbon underneath.

Step 6

  • Lift up lever underneath the ribbon to detach the keyboard.

Lift up lever underneath the ribbon to detach the keyboard.

Step 7

              Upper Casing
  • Remove memory/wireless compartment cover.

Remove memory/wireless compartment cover.

Step 8

  • Flip so the Vaio Logo is face down.
  • Locate and remove a total of 8 screws on the bottom.

Flip so the Vaio Logo is face down.

Locate and remove a total of 8 screws on the bottom.

Step 9

  • Find and remove 5 screws (they all have arrows next to them) from cover.

Find and remove 5 screws (they all have arrows next to them) from cover.

Step 10

  • Flip the laptop over so the Vaio logo is face up.
  • Use the spudger to pop up the upper casing.
  • Do not lift too much as the upper casing is attached to wires underneath.
  • Remove the wires that are attaching the upper casing to the motherboard.

Flip the laptop over so the Vaio logo is face up.

Use the spudger to pop up the upper casing.

Do not lift too much as the upper casing is attached to wires underneath.

Remove the wires that are attaching the upper casing to the motherboard.

Step 11

  • Remove the upper casing.

Remove the upper casing.

Step 12

              Optical Drive
  • Remove the screw holding the optical drive casing to the logic board.

Remove the screw holding the optical drive casing to the logic board.

Step 13

  • Locate ribbon connecting optical drive case to logic board.
  • Pop off the ribbon.
  • Remove the metal PC-Card cage.

Locate ribbon connecting optical drive case to logic board.

Pop off the ribbon.

Remove the metal PC-Card cage.

Step 14

  • Remove the four screws holding the optical drive to the logic board.

Remove the four screws holding the optical drive to the logic board.

Step 15

  • Locate brown locking tab above optical drive.
  • Lift up on brown locking tab until ribbon is loose.
  • Gently slide out and remove the optical drive from the computer.

Locate brown locking tab above optical drive.

Lift up on brown locking tab until ribbon is loose.

Gently slide out and remove the optical drive from the computer.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.

Author

                                      with 6 other contributors 


                    Jeffrey Bryan

Member since: 04/20/2010

552 Reputation

                                      11 Guides authored                  



                       Badges:
                       15







                                                        +12 more badges

Team

                       Cal Poly, Team 16-4, Maness Spring 2010                        

                                                  Member of Cal Poly, Team 16-4, Maness Spring 2010 



                    CPSU-MANESS-S10S16G4                     


                                            4 Members                     


                                            19 Guides authored