Difficulty

Easy

Steps

6

Time Required

                          2 minutes

Sections

3

  • Battery
  • 2 steps
  • Back Panel
  • 2 steps
  • SSD
  • 2 steps

Flags

0

  • BackSony Vaio SVT151A11L

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Battery
  • Flip the laptop over so that the battery on the underside of the device is revealed.
  • Unscrew the two 11mm slotted silver screws that can be found at the top of the battery.

Flip the laptop over so that the battery on the underside of the device is revealed.

Unscrew the two 11mm slotted silver screws that can be found at the top of the battery.

1024

Step 2

  • Wedge the plastic opening tool between the back panel and the battery on the top left side of the device.
  • Push down on the plastic opening tool until the battery lifts from the back of the laptop.
  • Grab the battery and remove it from the device.

Wedge the plastic opening tool between the back panel and the battery on the top left side of the device.

Push down on the plastic opening tool until the battery lifts from the back of the laptop.

Grab the battery and remove it from the device.

Step 3

              Back Panel
  • Unscrew the three 4mm screws using a JIS #0 screwdriver.
  • Unscrew the eight 7 mm screws using a JIS #0 screwdriver.
  • Grab and lift the edge of the panel to pull it free from the rest of the computer.

Unscrew the three 4mm screws using a JIS #0 screwdriver.

Unscrew the eight 7 mm screws using a JIS #0 screwdriver.

Grab and lift the edge of the panel to pull it free from the rest of the computer.

Step 4

  • Grab the disk drive located at the edge of the computer and pull it it out.
  • Unscrew the three 7 mm screws with a JIS #0 screwdriver.

Grab the disk drive located at the edge of the computer and pull it it out.

Unscrew the three 7 mm screws with a JIS #0 screwdriver.

Step 5

              SSD
  • Unscrew single 4mm screw using a JIS #0 screwdriver.
  • Lift up one end of the SSD.
  • Pull the SSD from its port.

Unscrew single 4mm screw using a JIS #0 screwdriver.

Lift up one end of the SSD.

Pull the SSD from its port.

Step 6

  • Leave the port empty so that a new SSD can be placed inside.

Leave the port empty so that a new SSD can be placed inside.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 1 other contributor 


                    Nathan McGarvey

Member since: 10/20/2017

481 Reputation

                                      4 Guides authored                  



                       Badges:
                       13







                                                        +10 more badges

Team

                       UMass Dartmouth, Team S4-G6, Julie Fall 2017                        

                                                  Member of UMass Dartmouth, Team S4-G6, Julie Fall 2017 



                    UMASSD-JULIE-F17S4G6                     


                                            2 Members                     


                                            6 Guides authored