Difficulty

Moderate

Steps

10

Time Required

                          25 minutes

Sections

4

  • Battery
  • 2 steps
  • Back Panel
  • 2 steps
  • Multimedia Card
  • 3 steps
  • Multimedia Card Reader
  • 3 steps

Flags

0

  • BackSony Vaio SVT151A11L

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Battery
  • Flip the laptop over so that the battery on the underside of the device is revealed.
  • Unscrew the two 11mm slotted silver screws that can be found at the top of the battery.

Flip the laptop over so that the battery on the underside of the device is revealed.

Unscrew the two 11mm slotted silver screws that can be found at the top of the battery.

1024

Step 2

  • Wedge the plastic opening tool between the back panel and the battery on the top left side of the device.
  • Push down on the plastic opening tool until the battery lifts from the back of the laptop.
  • Grab the battery and remove it from the device.

Wedge the plastic opening tool between the back panel and the battery on the top left side of the device.

Push down on the plastic opening tool until the battery lifts from the back of the laptop.

Grab the battery and remove it from the device.

Step 3

              Back Panel
  • Unscrew the three 4mm screws using a JIS #0 screwdriver.
  • Unscrew the eight 7 mm screws using a JIS #0 screwdriver.
  • Grab and lift the edge of the panel to pull it free from the rest of the computer.

Unscrew the three 4mm screws using a JIS #0 screwdriver.

Unscrew the eight 7 mm screws using a JIS #0 screwdriver.

Grab and lift the edge of the panel to pull it free from the rest of the computer.

Step 4

  • Grab the disk drive located at the edge of the computer and pull it it out.
  • Unscrew the three 7 mm screws with a JIS #0 screwdriver.

Grab the disk drive located at the edge of the computer and pull it it out.

Unscrew the three 7 mm screws with a JIS #0 screwdriver.

Step 5

              Multimedia Card
  • Get unobstructed access to the multimedia card.

Get unobstructed access to the multimedia card.

Step 6

  • Unscrew the two 2mm screws from the board using JIS #0 screwdriver.

Unscrew the two 2mm screws from the board using JIS #0 screwdriver.

Step 7

  • Lift up multimedia card.
  • Pull out ribbon cable from connected board.

Lift up multimedia card.

Pull out ribbon cable from connected board.

Step 8

              Multimedia Card Reader
  • Get unobstructed access to the multimedia card reader.

Get unobstructed access to the multimedia card reader.

Step 9

  • Unscrew three 2mm screws using JIS #0 screwdriver.

Unscrew three 2mm screws using JIS #0 screwdriver.

Step 10

  • Gently lift up multimedia card reader.
  • Pull out ribbon cable from the board.

Gently lift up multimedia card reader.

Pull out ribbon cable from the board.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 2 other contributors 


                    Namuundari Zorigtbaatar

Member since: 10/18/2017

201 Reputation

                                      2 Guides authored                  



                       Badges:
                       6







                                                        +3 more badges

Team

                       UMass Dartmouth, Team S4-G6, Julie Fall 2017                        

                                                  Member of UMass Dartmouth, Team S4-G6, Julie Fall 2017 



                    UMASSD-JULIE-F17S4G6                     


                                            2 Members                     


                                            6 Guides authored