Difficulty
Moderate
Steps
21
Time Required
Suggest a time??
Sections
3
- Battery
- 5 steps
- Display
- 9 steps
- Webcam
- 7 steps
Flags
1
Missing Details
Some of this guide’s details are missing. Help users by adding tools, difficulty, or time.
BackSony Vaio SVE151G11L
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Battery
- Turn the laptop over so its underside is facing upwards and visible.
Turn the laptop over so its underside is facing upwards and visible.
1024
Step 2
- Standing so that the barcode and warning labels are upright and legible, push the left tab up and away from yourself.
Standing so that the barcode and warning labels are upright and legible, push the left tab up and away from yourself.
Step 3
- Standing so that the barcode and warning labels are upright and legible, push the right tab up and away from yourself.
Standing so that the barcode and warning labels are upright and legible, push the right tab up and away from yourself.
Step 4
- Locate the small gap where the battery and the laptop shell meet. Lift from the gap and rotate the battery up and away from yourself.
Locate the small gap where the battery and the laptop shell meet. Lift from the gap and rotate the battery up and away from yourself.
Step 5
- Pull battery away from laptop.
Pull battery away from laptop.
Step 6
Display
- Flip laptop over so the bottom is facing upwards.
- Remove bottom of laptop.
Flip laptop over so the bottom is facing upwards.
Remove bottom of laptop.
Step 7
- Remove antenna wires attached to the WiFi card using a plastic opening tool.
Remove antenna wires attached to the WiFi card using a plastic opening tool.
Step 8
- Remove the other antenna wire.
Remove the other antenna wire.
Step 9
- Remove the display cable by pulling upwards.
Remove the display cable by pulling upwards.
Step 10
- Remove the power display cable with a plastic opening tool by pushing outwards.
Remove the power display cable with a plastic opening tool by pushing outwards.
Step 11
- Remove 4 hinge screws with a Phillips #0 screwdriver.
Remove 4 hinge screws with a Phillips #0 screwdriver.
Step 12
- Lift upward on the hinges with a plastic opening tool to release them.
Lift upward on the hinges with a plastic opening tool to release them.
Step 13
- Separate the bottom of the laptop from the monitor.
Separate the bottom of the laptop from the monitor.
Step 14
- Completely detach screen from the laptop.
Completely detach screen from the laptop.
Step 15
Webcam
- Remove the rubber nipples to expose the screws using the pointed side of the spudger.
Remove the rubber nipples to expose the screws using the pointed side of the spudger.
Step 16
- Remove each of the screws revealed from the step below with a P00 screwdriver.
Remove each of the screws revealed from the step below with a P00 screwdriver.
Step 17
- Pop open display housing and follow the plastic to remove the screen.
Pop open display housing and follow the plastic to remove the screen.
Step 18
- Remove the camera cable with the spudger.
Remove the camera cable with the spudger.
Step 19
- Remove screws on both sides using a P000 screwdriver.
Remove screws on both sides using a P000 screwdriver.
Step 20
- Pop out the board using a spudger.
Pop out the board using a spudger.
Step 21
- The board is now removed.
The board is now removed.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
with 3 other contributors
Azka Khanani
Member since: 10/17/2018
313 Reputation
2 Guides authored
Badges:
3
Team
UMass Dartmouth, Team S9-G9, Valliere Fall 2018
Member of UMass Dartmouth, Team S9-G9, Valliere Fall 2018
UMASSD-VALLIERE-F18S9G9
4 Members
6 Guides authored