Difficulty
Difficult
Steps
15
Time Required
2 hours
Sections
4
- Battery
- 3 steps
- Keyboard Assembly
- 4 steps
- Motherboard
- 4 steps
- Screen
- 4 steps
Flags
3
Inconsistent Images
Updating the images on this guide to be more consistent with the prerequisites would increase its awesomeness.
Action Shots
Be an action hero! This guide needs images that better demonstrate how to perform specific actions.
Confusing Text
Some of this guide’s text is confusing, duplicated, or off-topic. Clarify it by editing!
BackSony Vaio SVE111B11L
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Battery
- Remove the charging adaptor. Some charge may still be in the battery or computer. DO NOT touch connectors or copper yellow connector.
- Locate the battery on the bottom of the computer.
- Flip the computer so that the battery faces you.
Remove the charging adaptor. Some charge may still be in the battery or computer. DO NOT touch connectors or copper yellow connector.
Locate the battery on the bottom of the computer.
Flip the computer so that the battery faces you.
1024
Step 2
- Locate the two latches with the words “lock” and “release” on them.
Locate the two latches with the words “lock” and “release” on them.
Step 3
- Push the latches towards each other and lift the battery to remove it.
Push the latches towards each other and lift the battery to remove it.
Step 4
Keyboard Assembly
- Remove the memory door on the bottom of the computer to access the screw for the keyboard.
- The screws for the memory door do not come out.
Remove the memory door on the bottom of the computer to access the screw for the keyboard.
The screws for the memory door do not come out.
Step 5
- Remove the 6.7 mm screw that holds the keyboard assembly in place.
Remove the 6.7 mm screw that holds the keyboard assembly in place.
Step 6
- Be careful not to break the keyboard wire connection.
- Slide the wires out, away from the solder connections.
- Flip the computer over and open it.
Be careful not to break the keyboard wire connection.
Slide the wires out, away from the solder connections.
Flip the computer over and open it.
Step 7
- Gently pry the keyboard assembly from the screen side, using an opening tool. You will need to lift the keyboard about two inches.
- Using an opening tool, gently pull out and slightly up on the connector clip.
- Gently lift the keyboard assembly up and out.
Gently pry the keyboard assembly from the screen side, using an opening tool. You will need to lift the keyboard about two inches.
Using an opening tool, gently pull out and slightly up on the connector clip.
Gently lift the keyboard assembly up and out.
Step 8
Motherboard
- Remove charging adaptor. Some charge may still be in the battery or computer.
- DO NOT touch connectors or copper yellow connector.
- Take the covers over the motherboard off.
Remove charging adaptor. Some charge may still be in the battery or computer.
DO NOT touch connectors or copper yellow connector.
Take the covers over the motherboard off.
Step 9
- Locate and remove the screws holding the motherboard down.
- Screws: L 4.6mm X D 1.85mm
Locate and remove the screws holding the motherboard down.
Screws: L 4.6mm X D 1.85mm
Step 10
- Locate the wires and connectors.
- Unplug any connectors that are interfering with the removal of the motherboard.
Locate the wires and connectors.
Unplug any connectors that are interfering with the removal of the motherboard.
Step 11
- Gently lift the mother board out, being careful of the loose connectors and wires
Gently lift the mother board out, being careful of the loose connectors and wires
Step 12
Screen
- Remove charging adaptor and battery. Some charge may still be in the battery or computer.
- DO NOT touch connectors or copper yellow connector.
- Locate screws. L 3.35mm X D 1.8mm
- Remove Screws.
- Lay the screen on a hard flat surface.
- Remove hinges and wires for ease of removal.
Remove charging adaptor and battery. Some charge may still be in the battery or computer.
Locate screws. L 3.35mm X D 1.8mm
Remove Screws.
Lay the screen on a hard flat surface.
Remove hinges and wires for ease of removal.
Step 13
- Gently remove the screen cover.
- Be careful of the camera at the top of the screen.
- Be careful of the seal tape between the cover and the screen.
Gently remove the screen cover.
Be careful of the camera at the top of the screen.
Be careful of the seal tape between the cover and the screen.
Step 14
- Locate the wires and connectors.
- Unplug the wires from the connectors.
- Be careful of the yellow tape around the connection.
Unplug the wires from the connectors.
Be careful of the yellow tape around the connection.
Step 15
- Gently lift the screen assembly up and out.
Gently lift the screen assembly up and out.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
One other person completed this guide.
Author
with 5 other contributors
John Noll
Member since: 09/29/2016
777 Reputation
5 Guides authored
Badges:
11
+8 more badges
Team
Eastern Washington University, Team 1-5, Crane Fall 2016
Member of Eastern Washington University, Team 1-5, Crane Fall 2016
EWU-CRANE-F16S1G5
4 Members
5 Guides authored
