Difficulty

Difficult

Steps

7

Time Required

                          40 minutes - 2 hours

Sections

2

  • Battery
  • 3 steps
  • Keyboard Assembly
  • 4 steps

Flags

Inconsistent Images

Updating the images on this guide to be more consistent with the prerequisites would increase its awesomeness.

Better Introduction

Improve this guide by completing or revising its introduction.

  • BackSony Vaio SVE111B11L

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

What you need

Step 1

              Battery
  • Remove the charging adaptor. Some charge may still be in the battery or computer. DO NOT touch connectors or copper yellow connector.
  • Locate the battery on the bottom of the computer.
  • Flip the computer so that the battery faces you.

Remove the charging adaptor. Some charge may still be in the battery or computer. DO NOT touch connectors or copper yellow connector.

Locate the battery on the bottom of the computer.

Flip the computer so that the battery faces you.

1024

Step 2

  • Locate the two latches with the words “lock” and “release” on them.

Locate the two latches with the words “lock” and “release” on them.

Step 3

  • Push the latches towards each other and lift the battery to remove it.

Push the latches towards each other and lift the battery to remove it.

Step 4

              Keyboard Assembly
  • Remove the memory door on the bottom of the computer to access the screw for the keyboard.
  • The screws for the memory door do not come out.

Remove the memory door on the bottom of the computer to access the screw for the keyboard.

The screws for the memory door do not come out.

Step 5

  • Remove the 6.7 mm screw that holds the keyboard assembly in place.

Remove the 6.7 mm screw that holds the keyboard assembly in place.

Step 6

  • Be careful not to break the keyboard wire connection.
  • Slide the wires out, away from the solder connections.
  • Flip the computer over and open it.

Be careful not to break the keyboard wire connection.

Slide the wires out, away from the solder connections.

Flip the computer over and open it.

Step 7

  • Gently pry the keyboard assembly from the screen side, using an opening tool. You will need to lift the keyboard about two inches.
  • Using an opening tool, gently pull out and slightly up on the connector clip.
  • Gently lift the keyboard assembly up and out.

Gently pry the keyboard assembly from the screen side, using an opening tool. You will need to lift the keyboard about two inches.

Using an opening tool, gently pull out and slightly up on the connector clip.

Gently lift the keyboard assembly up and out.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      2 other people completed this guide.

Author

                                      with 6 other contributors 


                    John Noll

Member since: 09/29/2016

777 Reputation

                                      5 Guides authored                  



                       Badges:
                       11







                                                        +8 more badges

Team

                       Eastern Washington University, Team 1-5, Crane Fall 2016                        

                                                  Member of Eastern Washington University, Team 1-5, Crane Fall 2016 



                    EWU-CRANE-F16S1G5                     


                                            4 Members                     


                                            5 Guides authored