Sony Vaio Pro 13 Internal Battery Replacement Repair Guide

Difficulty

Easy

Steps

Time Required

                          10 minutes

Sections

Bottom Cover
3 steps
Internal Battery
2 steps

Flags

BackSony Vaio Pro 13
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications

Introduction

What you need

Step 1

              Bottom Cover

Remove cover for the extended battery connector. Use your finger nail or a plastic opening tool to remove it.
Remove the two rubber feet at the back of the computer, these can be removed in the same way.

Remove cover for the extended battery connector. Use your finger nail or a plastic opening tool to remove it.

Remove the two rubber feet at the back of the computer, these can be removed in the same way.

1024

Step 2

Remove the four 5.6mm Philips #00 screws located at the top of the computer.
Remove the eight 3.6mm Philips #00 screws on the base of the computer.

Remove the four 5.6mm Philips #00 screws located at the top of the computer.

Remove the eight 3.6mm Philips #00 screws on the base of the computer.

Step 3

Using a plastic opening tool, pry the plastic casing away from the base of the computer, the remaining clips around the edges can be released using your hands.
Leave the side with the USB and audio port until last, then slide the case out and off, so the audio port doesn’t get caught.

Using a plastic opening tool, pry the plastic casing away from the base of the computer, the remaining clips around the edges can be released using your hands.

Leave the side with the USB and audio port until last, then slide the case out and off, so the audio port doesn’t get caught.

Step 4

              Internal Battery

Once the bottom cover is removed, peel away the piece of tape located near the fan and heat sink assembly.

Once the bottom cover is removed, peel away the piece of tape located near the fan and heat sink assembly.

Step 5

Remove the three 4.2mm Philips #0 screws located at the top of the battery.
Simply lift the battery away from the computer.

Remove the three 4.2mm Philips #0 screws located at the top of the battery.

Simply lift the battery away from the computer.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      7 other people completed this guide.

Author

                                      with 3 other contributors

                    Alex R

Member since: 01/29/2016

1,005 Reputation

                                      5 Guides authored                  



                       Badges:
                       13







                                                        +10 more badges

Team

                       Western Carolina University, Team 1-3, Virtue Spring 2016                        

                                                  Member of Western Carolina University, Team 1-3, Virtue Spring 2016 



                    WCU-VIRTUE-S16S1G3                     


                                            5 Members                     


                                            12 Guides authored

Hasnain - Jan 24, 2021

I need help my Sony vaio pro 13 svp132a1cm. the power button light is dim and charging light is on but it won’t turn on I have tried everything if any one can help that will be great

Introduction#

What you need#

Team#

Introduction

What you need

Team