Difficulty

Easy

Steps

5

Time Required

                          10 minutes

Sections

2

  • Battery
  • 2 steps
  • RAM
  • 3 steps

Flags

1

Action Shots

Be an action hero! This guide needs images that better demonstrate how to perform specific actions.

  • BackSony VAIO PCG-933A

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Battery
  • Turn the laptop upside down so that the top is sitting on a flat surface.
  • If you are looking at the bottom of the laptop the battery is located on the front right side of the laptop; the opposite side from the floppy disk drive.

Turn the laptop upside down so that the top is sitting on a flat surface.

If you are looking at the bottom of the laptop the battery is located on the front right side of the laptop; the opposite side from the floppy disk drive.

1024

Step 2

  • As shown by the arrow, slide the plastic cover up and then pull out and downwards.
  • You should now be able to pull the battery out.

As shown by the arrow, slide the plastic cover up and then pull out and downwards.

You should now be able to pull the battery out.

Step 3

              RAM
  • With the laptop facing you, flip the laptop upside down.

With the laptop facing you, flip the laptop upside down.

Step 4

  • Remove the 4mm Phillips screw that holds the small panel in the center of the laptop in place.
  • Then remove the panel covering the RAM.
  • The RAM should now be visible.

Remove the 4mm Phillips screw that holds the small panel in the center of the laptop in place.

Then remove the panel covering the RAM.

The RAM should now be visible.

Step 5

  • Release the plastic switches on each side of the stick of RAM.
  • Carefully slide the stick of RAM out at an angle.
  • DO NOT FORCE OUT.

Release the plastic switches on each side of the stick of RAM.

Carefully slide the stick of RAM out at an angle.

DO NOT FORCE OUT.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.

Author

                                      with 5 other contributors 


                    Sara Lillard

Member since: 04/11/2011

165 Reputation

                                      8 Guides authored                  



                       Badges:
                       9







                                                        +6 more badges

Team

                       Cal Poly, Team 12-36, Maness Spring 2011                        

                                                  Member of Cal Poly, Team 12-36, Maness Spring 2011 



                    CPSU-MANESS-S11S12G36                     


                                            4 Members                     


                                            16 Guides authored