Difficulty

Easy

Steps

6

Time Required

                          5 - 10 minutes

Sections

2

  • Battery
  • 2 steps
  • RAM
  • 4 steps

Flags

0

  • BackSony Vaio PCG-61411L

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Battery
  • Be sure to disconnect the device charger and power down the device before beginning.
  • Turn the device over onto its back, where the battery is at the top of the device. Slide the “lock” switch to the right.

Be sure to disconnect the device charger and power down the device before beginning.

Turn the device over onto its back, where the battery is at the top of the device. Slide the “lock” switch to the right.

1024

Step 2

  • Slide the “release” switch to the left and gently lift the battery up to remove it.
  • Completely remove the battery from the device.

Slide the “release” switch to the left and gently lift the battery up to remove it.

Completely remove the battery from the device.

Step 3

              RAM
  • The RAM cards reside in the rectangle shaped plate in the center of the back panel of the device.

The RAM cards reside in the rectangle shaped plate in the center of the back panel of the device.

Step 4

  • Unscrew the single PH1 6mm screw at the top of the panel. The screw remains in the panel.
  • Remove the panel by lifting it towards yourself.

Unscrew the single PH1 6mm screw at the top of the panel. The screw remains in the panel.

Remove the panel by lifting it towards yourself.

Step 5

  • To remove the individual RAM card panels, snap back the metal latches on each side of the cards.

To remove the individual RAM card panels, snap back the metal latches on each side of the cards.

Step 6

  • After pinching the metal latches, the RAM card should pop out slightly upward.
  • Remove the cards by pulling them out to the left.
  • Repeat for the second panel of RAM cards.

After pinching the metal latches, the RAM card should pop out slightly upward.

Remove the cards by pulling them out to the left.

Repeat for the second panel of RAM cards.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 2 other contributors 


                    Sean  Lyon

Member since: 03/01/2018

381 Reputation

                                      3 Guides authored                  



                       Badges:
                       5







                                                        +2 more badges

Team

                       UMass Dartmouth, Team S2-G1, Simcock Spring 2018                        

                                                  Member of UMass Dartmouth, Team S2-G1, Simcock Spring 2018 



                    UMASSD-SIMCOCK-S18S2G1                     


                                            3 Members                     


                                            5 Guides authored