Difficulty
Moderate
Steps
9
Time Required
10 - 15 minutes
Sections
3
- Battery
- 2 steps
- Hard Drive
- 4 steps
- Optical Disc Drive
- 3 steps
Flags
0
BackSony Vaio PCG-61411L
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Battery
- Be sure to disconnect the device charger and power down the device before beginning.
- Turn the device over onto its back, where the battery is at the top of the device. Slide the “lock” switch to the right.
Be sure to disconnect the device charger and power down the device before beginning.
Turn the device over onto its back, where the battery is at the top of the device. Slide the “lock” switch to the right.
1024
Step 2
- Slide the “release” switch to the left and gently lift the battery up to remove it.
- Completely remove the battery from the device.
Slide the “release” switch to the left and gently lift the battery up to remove it.
Completely remove the battery from the device.
Step 3
Hard Drive
- The hard drive panel is located in the bottom right corner of the device.
The hard drive panel is located in the bottom right corner of the device.
Step 4
- Using the PH #0 screwdriver, unscrew the two 6.5mm screws located in the bottom left and middle right of the panel. The screws remain in the panels.
- Remove the panel by pulling it up towards yourself.
Using the PH #0 screwdriver, unscrew the two 6.5mm screws located in the bottom left and middle right of the panel. The screws remain in the panels.
Remove the panel by pulling it up towards yourself.
Step 5
- Using a PH0 screwdriver, remove the four 3mm silver screws located in the external hard drive cover.
- Using a PH00 screwdriver, remove the final 3mm black screw located in the top right section of the hard drive cover.
- Carefully remove the silver hard drive cover.
Using a PH0 screwdriver, remove the four 3mm silver screws located in the external hard drive cover.
Using a PH00 screwdriver, remove the final 3mm black screw located in the top right section of the hard drive cover.
Carefully remove the silver hard drive cover.
Step 6
- Detach the hard drive by disconnecting it from the motherboard, pulling it gently from left to right.
Detach the hard drive by disconnecting it from the motherboard, pulling it gently from left to right.
Step 7
Optical Disc Drive
- Remove the 5mm screws with the PH0 screwdriver.
- Remove the 3mm screws with the PH0 screwdriver.
Remove the 5mm screws with the PH0 screwdriver.
Remove the 3mm screws with the PH0 screwdriver.
Step 8
- Lift the backplate from bottom right and left corner and remove it from the laptop.
Lift the backplate from bottom right and left corner and remove it from the laptop.
Step 9
- Slide your finger from the right of the optical disc and pull the optical disc from right to left.
Slide your finger from the right of the optical disc and pull the optical disc from right to left.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
with 2 other contributors
Patrick Jean Baptiste
Member since: 03/01/2018
214 Reputation
2 Guides authored
Badges:
4
+1 more badge
Team
UMass Dartmouth, Team S2-G1, Simcock Spring 2018
Member of UMass Dartmouth, Team S2-G1, Simcock Spring 2018
UMASSD-SIMCOCK-S18S2G1
3 Members
5 Guides authored