Difficulty

Easy

Steps

6

Time Required

                          1 - 2 minutes

Sections

2

  • Battery
  • 4 steps
  • WiFi Board
  • 2 steps

Flags

0

  • BackSony Vaio PCG-4121GL

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Battery
  • Remove the two 3mm Phillips #0 screws on the bottom of the computer that secure the plastic backing.

Remove the two 3mm Phillips #0 screws on the bottom of the computer that secure the plastic backing.

1024

Step 2

  • Pull the bottom plate towards yourself until it unhinges fully.
  • Once the plate is free from the backing remove it completely.

Pull the bottom plate towards yourself until it unhinges fully.

Once the plate is free from the backing remove it completely.

Step 3

  • Look for the blue tab that is located to the bottom left of the battery.

Look for the blue tab that is located to the bottom left of the battery.

Step 4

  • Pull the blue tab towards yourself until you hear a click.
  • Once the blue tab is released, pull up on the battery.
  • Once the battery can move freely, take it out completely.
  • It may be helpful to have a spudger to make it easier to release the blue tab.

Pull the blue tab towards yourself until you hear a click.

Once the blue tab is released, pull up on the battery.

Once the battery can move freely, take it out completely.

It may be helpful to have a spudger to make it easier to release the blue tab.

Step 5

              WiFi Board
  • Lift up the two golden knobs on the left side of the WiFi board.
  • Remove the single 3mm Phillips #0 screw located on the WiFi board to the top left of the battery compartment.

Lift up the two golden knobs on the left side of the WiFi board.

Remove the single 3mm Phillips #0 screw located on the WiFi board to the top left of the battery compartment.

Step 6

  • Once the screw and the golden knobs have been disconnected, pull the WiFi board out to the left.
  • Once the WiFi board is free from the device, remove completely.

Once the screw and the golden knobs have been disconnected, pull the WiFi board out to the left.

Once the WiFi board is free from the device, remove completely.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 2 other contributors 


                    Miguel Camarena

Member since: 01/24/2019

352 Reputation

                                      3 Guides authored                  



                       Badges:
                       5







                                                        +2 more badges

Team

                       Cal Poly, Team S2-G2, White Winter 2019                        

                                                  Member of Cal Poly, Team S2-G2, White Winter 2019 



                    CPSU-WHITE-W19S2G2                     


                                            4 Members                     


                                            10 Guides authored