Difficulty

Easy

Steps

8

Time Required

                          10 minutes            

Sections

2

  • Battery
  • 4 steps
  • Hard Drive
  • 4 steps

Flags

0

  • BackSony Vaio PCG-3C2L

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Battery               
  • Turn your computer over so the bottom is facing up.
  • The battery should be in the top on the back of the computer.

Turn your computer over so the bottom is facing up.

The battery should be in the top on the back of the computer.

1024

Step 2

  • Initially, the “lock” button should be pushed all the way to the left. To unlock the battery, move the lock button from the left to the right.

Initially, the “lock” button should be pushed all the way to the left. To unlock the battery, move the lock button from the left to the right.

Step 3

  • After unlocking the battery, hold the “release” button and push to the left.

After unlocking the battery, hold the “release” button and push to the left.

Step 4

  • Keep the “release” button pressed.
  • Use the iFixit opening tool (or your hands) to lift the battery up.

Keep the “release” button pressed.

Use the iFixit opening tool (or your hands) to lift the battery up.

Step 5

              Hard Drive               
  • Place the laptop so that the bottom is facing up.

Place the laptop so that the bottom is facing up.

Step 6

  • Using a Phillips #0 screwdriver, remove the two 3.5mm screws on the hard drive cover.

Using a Phillips #0 screwdriver, remove the two 3.5mm screws on the hard drive cover.

Step 7

  • Using a Phillips #0 screwdriver, remove the three 8mm screws on the hard drive casing.
  • Remove the black hard drive casing by pulling it off.

Using a Phillips #0 screwdriver, remove the three 8mm screws on the hard drive casing.

Remove the black hard drive casing by pulling it off.

Step 8

  • Remove the hard drive by carefully sliding it out.

Remove the hard drive by carefully sliding it out.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 3 other contributors 

                    Chloe Nelson                     

Member since: 09/16/2019

252 Reputation

                                      2 Guides authored                  



                       Badges:
                       6







                                                        +3 more badges                           

Team

                       Embry-Riddle Aeronautical University, Team S8-G3, Salas Fall 2019                        

                                                  Member of Embry-Riddle Aeronautical University, Team S8-G3, Salas Fall 2019 



                    ERAU-SALAS-F19S8G3                     


                                            4 Members                     


                                            12 Guides authored