Difficulty

Easy

Steps

6

Time Required

                          5 - 10 minutes

Sections

2

  • Battery
  • 4 steps
  • Fan
  • 2 steps

Flags

0

  • BackSony Vaio Fit SVF15N26CXB

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Battery
  • Remove the following ten screws from the bottom case of the laptop:
  • Two 6.5mm Phillips #00 Phillips screws.
  • Four 8.95mm Phillips #00 screws.
  • Four 6.25mm Phillips #00 screws.
  • The screws may be hidden underneath a rubber foot that can be removed with a spudger.

Remove the following ten screws from the bottom case of the laptop:

Two 6.5mm Phillips #00 Phillips screws.

Four 8.95mm Phillips #00 screws.

Four 6.25mm Phillips #00 screws.

The screws may be hidden underneath a rubber foot that can be removed with a spudger.

1024

Step 2

  • Use a plastic opening tool to separate the bottom cover from the laptop.
  • Lift the lower cover and pull away from the laptop.

Use a plastic opening tool to separate the bottom cover from the laptop.

Lift the lower cover and pull away from the laptop.

Step 3

  • Remove the eight Phillips #00 screws from the battery:
  • Six 4.65mm screws.
  • Two 4.65mm screws.

Remove the eight Phillips #00 screws from the battery:

Six 4.65mm screws.

Two 4.65mm screws.

Step 4

  • Lift the battery up and pull it out of the laptop.

Lift the battery up and pull it out of the laptop.

Step 5

              Fan
  • Remove the four 4.58mm Phillips #00 screws from the cooling system.
  • Unscrew the five Phillips #00 screws from the heatsink.
  • These screws will remain attached to the heatsink.

Remove the four 4.58mm Phillips #00 screws from the cooling system.

Unscrew the five Phillips #00 screws from the heatsink.

These screws will remain attached to the heatsink.

Step 6

  • Disconnect the fan from the motherboard.
  • This connector should be pulled upwards, not outwards.
  • Remove the fan unit.

Disconnect the fan from the motherboard.

This connector should be pulled upwards, not outwards.

Remove the fan unit.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      2 other people completed this guide.

Author

                                      with 3 other contributors 


                    Althea McDavid

Member since: 02/14/2018

842 Reputation

                                      6 Guides authored                  



                       Badges:
                       10







                                                        +7 more badges

Team

                       USF Tampa, Team S2-G4, Nance Spring 2018                        

                                                  Member of USF Tampa, Team S2-G4, Nance Spring 2018 



                    USFT-NANCE-S18S2G4                     


                                            4 Members                     


                                            11 Guides authored