Difficulty

Easy

Steps

6

Time Required

                          15 - 20 minutes

Sections

2

  • Battery Replacement
  • 4 steps
  • Hard Drive Replacement
  • 2 steps

Flags

0

  • BackSony Vaio Fit SVF14A190X

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Battery Replacement
  • Make sure the battery is drained or the computer is turned off.
  • Use the Phillips head screw driver to remove the eleven 6 mm screws.
  • Use the Phillips head screw driver to remove the one 4 mm screw securing the CD drive.

Make sure the battery is drained or the computer is turned off.

Use the Phillips head screw driver to remove the eleven 6 mm screws.

Use the Phillips head screw driver to remove the one 4 mm screw securing the CD drive.

1024

Step 2

  • Insert the plastic opening tool into the slit of the CD drive.
  • Then pull it outwards.
  • Grab the CD drive with your hand.
  • Take the CD drive all the way out.

Insert the plastic opening tool into the slit of the CD drive.

Then pull it outwards.

Grab the CD drive with your hand.

Take the CD drive all the way out.

Step 3

  • Insert the plastic opening tool into the slit between the back cover and the rest of the computer.
  • Move the plastic opening tool around all sides of the device.
  • Peel off the back cover.

Insert the plastic opening tool into the slit between the back cover and the rest of the computer.

Move the plastic opening tool around all sides of the device.

Peel off the back cover.

Step 4

  • Use the Phillips head screw driver to remove the four 7 mm screws.
  • Lift the battery out with your hand.

Use the Phillips head screw driver to remove the four 7 mm screws.

Lift the battery out with your hand.

Step 5

              Hard Drive Replacement
  • Use the Phillips head screw driver to remove four 4mm screws located on both sides of the hard drive.

Use the Phillips head screw driver to remove four 4mm screws located on both sides of the hard drive.

Step 6

  • Use a plastic opening tool to lift the hard drive up to the point where it can be grabbed.
  • Pull the hard drive horizontally to separate it from it’s connection.

Use a plastic opening tool to lift the hard drive up to the point where it can be grabbed.

Pull the hard drive horizontally to separate it from it’s connection.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 4 other contributors 


                    Ryan Silberger

Member since: 02/13/2018

109 Reputation

                                      1 Guide authored                  



                       Badges:
                       5







                                                        +2 more badges

Team

                       USF Tampa, Team S11-G3, Cheng Spring 2018                        

                                                  Member of USF Tampa, Team S11-G3, Cheng Spring 2018 



                    USFT-CHENG-S18S11G3                     


                                            4 Members                     


                                            11 Guides authored