Difficulty

Moderate

Steps

6

Time Required

Suggest a time??

Sections

1

  • Screen
  • 6 steps

Flags

Better Introduction

Improve this guide by completing or revising its introduction.

  • BackSony Vaio Fit 13A SVF13NA1UL

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

What you need

Step 1

              Screen               
  • Unlock the screen and lift the corner. Carefully turn it over until it faces away from the keyboard. This is the same procedure as turning the screen over to use the computer in the fashion of a tablet.

Unlock the screen and lift the corner. Carefully turn it over until it faces away from the keyboard. This is the same procedure as turning the screen over to use the computer in the fashion of a tablet.

1024

Step 2

              Unscrew the Screen               
  • Locate and remove all ten 1 mm Phillips #0 screws.

Locate and remove all ten 1 mm Phillips #0 screws.

Step 3

              Remove the Screen               
  • Use the Metal Spudger Set to carefully separate screen from backing. Be sure to keep the grey panel flush with the screen front.

Use the Metal Spudger Set to carefully separate screen from backing. Be sure to keep the grey panel flush with the screen front.

Step 4

              Remove this Connection               
  • Remove the single 1mm Phillips #0 screw that is connecting the screen and the device.

Remove the single 1mm Phillips #0 screw that is connecting the screen and the device.

Step 5

              Remove Strip               
  • Use tweezers to carefully separate the two connections of the strip from screen back panel.

Use tweezers to carefully separate the two connections of the strip from screen back panel.

Step 6

              Screen is Now Removed               
  • Replace with the new screen.

Replace with the new screen.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      3 other people completed this guide.                                             

Author

                                      with 5 other contributors 

                    Marii                     

Member since: 01/08/2015

643 Reputation

                                      3 Guides authored                  



                       Badges:
                       14







                                                        +11 more badges                           

Team

                       Cal Poly, Team 21-19, Maness Winter 2015                        

                                                  Member of Cal Poly, Team 21-19, Maness Winter 2015 



                    CPSU-MANESS-W15S21G19                     


                                            4 Members                     


                                            12 Guides authored                     

Josh - Mar 11, 2016

Reply

Bad. Do not follow this guide. The top half of the lid that has the word sony needs to be pried off the case first, it slides off. Then you remove the six or so screws from the screen, then follow the rest of these instructions, otherwise you end up with broken screw holes.

Freddie Maré - Sep 7, 2020

Reply

I found the problem with my laptop Screen flicker but it is not the screen or GPU or driver there is a loose or broken connection in the screen cable that could the flickering. It cost me a new screen and had the same issue if you fiddle with the screen cable you will see when you touch or move the cable the screen starts to flicker.