Difficulty

Moderate

Steps

6

Time Required

                          10 minutes

Sections

2

  • Screen
  • 1 step
  • Speaker
  • 5 steps

Flags

1

This guide has been the hard work of our awesome students and is found to be exceptionally cool by the iFixit staff.

  • BackSony SS-CCP1

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Screen
  • Pull screen cover from the edges for removal. This will not require much effort.

Pull screen cover from the edges for removal. This will not require much effort.

1024

Step 2

              Speaker
  • Remove the seven 18.06mm PH1 screws.

Remove the seven 18.06mm PH1 screws.

Step 3

  • Remove the crimps from the tweeter speaker.
  • If its not connected too tightly the crimps can be removed by hand pressure only.
  • If its too tight to be removed by hand, then you can use a pair of pliers to removed the crimps.
  • Never remove by pulling on the cables. Always pull by the metal crimps.

Remove the crimps from the tweeter speaker.

If its not connected too tightly the crimps can be removed by hand pressure only.

If its too tight to be removed by hand, then you can use a pair of pliers to removed the crimps.

Never remove by pulling on the cables. Always pull by the metal crimps.

Step 4

  • Remove the crimps from the 12cm loudspeaker.
  • If its not connected too tightly the crimps can be removed by hand pressure only.
  • If its too tight to be removed by hand, then you can use a pair of pliers to removed the crimps.
  • Never remove by pulling on the cables. Always pull by the metal crimps.

Remove the crimps from the 12cm loudspeaker.

Step 5

  • Remove the grommet using an object with a flat edge.
  • The grommet is not made of rubber, it is made of plastic. Be careful when removing it, as it can break easily.

Remove the grommet using an object with a flat edge.

The grommet is not made of rubber, it is made of plastic. Be careful when removing it, as it can break easily.

Step 6

  • Feed the speaker cable through the front of the box.

Feed the speaker cable through the front of the box.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      3 other people completed this guide.

Author

                                      with 2 other contributors 


                    Dallas

Member since: 10/10/2016

808 Reputation

                                      3 Guides authored                  



                       Badges:
                       12







                                                        +9 more badges

Team

                       IUPUI, Team 3-2, Baechle Fall 2016                        

                                                  Member of IUPUI, Team 3-2, Baechle Fall 2016 



                    IUPUI-BAECHLE-F16S3G2                     


                                            4 Members                     


                                            10 Guides authored