Sony Srs Xb40 Battery Replacement Repair Guide

Difficulty

Moderate

Steps

Time Required

                          20 minutes

Sections

Speaker Assembly Replacement
7 steps
Battery
3 steps

Flags

BackSony SRS-XB40
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications

Introduction

What you need

Step 1

              Speaker Assembly Replacement

Remove the speaker case from the outer casing by prying it from the base of the speaker using a metal spudger.

Remove the speaker case from the outer casing by prying it from the base of the speaker using a metal spudger.

1024

Step 2

Remove the four T-8 screws (15 mm long) from the black speaker face.

Remove the four T-8 screws (15 mm long) from the black speaker face.

Step 3

Pry the two rubber end pieces loose enough to pry off two pieces of the long plastic casing from the speaker body using a metal spudger.

Pry the two rubber end pieces loose enough to pry off two pieces of the long plastic casing from the speaker body using a metal spudger.

Step 4

Pry the two remaining rubber pieces of the casing completely away from the body of the speaker with the same metal pry tool.

Pry the two remaining rubber pieces of the casing completely away from the body of the speaker with the same metal pry tool.

Step 5

Once you have removed the outer blue casing, four T-8 screws (15 mm long) will be revealed on each corner. After removing these screws, simply pull the top part of the speaker way from the body to get the the inner part of the speaker.

Once you have removed the outer blue casing, four T-8 screws (15 mm long) will be revealed on each corner. After removing these screws, simply pull the top part of the speaker way from the body to get the the inner part of the speaker.

Step 6

Once you have gotten to the internal parts of the speaker, there are seven wires connecting the speaker plate to the body of the speaker. Pinch the release tabs at the top of each of the four main wires to remove them.

Once you have gotten to the internal parts of the speaker, there are seven wires connecting the speaker plate to the body of the speaker. Pinch the release tabs at the top of each of the four main wires to remove them.

Step 7

Simply pull the thin wires on each side to remove them from their attachment points.
Remove the final red and black wire by gently pulling it apart.
This will ultimately detach the speaker plate from the base.

Simply pull the thin wires on each side to remove them from their attachment points.

Remove the final red and black wire by gently pulling it apart.

This will ultimately detach the speaker plate from the base.

Step 8

              Battery

Unscrew the PH1 screw at the top of the speaker.

Unscrew the PH1 screw at the top of the speaker.

Step 9

Slide the white protective case out of the speaker.

Slide the white protective case out of the speaker.

Step 10

Unplug the wire that connects the battery to the motherboard.
To remove the battery, peel away the tape that holds the battery in place.

Unplug the wire that connects the battery to the motherboard.

To remove the battery, peel away the tape that holds the battery in place.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      10 other people completed this guide.

Author

                                      with 3 other contributors

                    Michael Shropshire

Member since: 01/29/2018

307 Reputation

                                      1 Guide authored                  



                       Badges:
                       7







                                                        +4 more badges

Team

                       University of Alabama, Team S1-G1, Bedsole Spring 2018                        

                                                  Member of University of Alabama, Team S1-G1, Bedsole Spring 2018 



                    UA-BEDSOLE-S18S1G1                     


                                            4 Members                     


                                            6 Guides authored

andrewamenard - Sep 11, 2018

Where can I purchase a replacement battery

jayrock.jo - Jul 24, 2020

Did you find the battery to this

Pepe hernandez - Apr 16, 2019

Brother you made my day…

I just finish your tutorial…thanks a

Johannes Tanz - Jun 3, 2019

Hi Pepe, where do i get the wright Batterie, what was your exact artikel? U cant find the ones mentioned in the manual… Thank you!!

ieezy naga - Jun 10, 2019

where can i purchase the new battery

Introduction#

What you need#

Team#

Introduction

What you need

Team