Difficulty
Very easy
Steps
10
Time Required
20 minutes
Sections
1
- Speaker Reverberator
- 10 steps
Flags
0
BackSony SRS-X55
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Speaker Reverberator
- Locate the six 9 mm screws on the bottom of the speaker and remove them using Phillips head #2.
Locate the six 9 mm screws on the bottom of the speaker and remove them using Phillips head #2.
1024
Step 2
- Insert a plastic spudger into the seam on the bottom panel and lift it away from the rest of the speaker.
Insert a plastic spudger into the seam on the bottom panel and lift it away from the rest of the speaker.
Step 3
- Locate the battery connection and unplug it using a pair of metal tweezers.
Locate the battery connection and unplug it using a pair of metal tweezers.
Step 4
- Locate the remaining two 3.5 mm screws on the bottom of the I/O board and remove them using a Phillips head #2 screwdriver.
Locate the remaining two 3.5 mm screws on the bottom of the I/O board and remove them using a Phillips head #2 screwdriver.
Step 5
- Remove the I/O board from the rest of the speaker. A plastic spudger can aid in this process if it is inserted into the edge as shown and gently pried.
Remove the I/O board from the rest of the speaker. A plastic spudger can aid in this process if it is inserted into the edge as shown and gently pried.
Step 6
- Insert a plastic spudger into the seam where the forward facing metal speaker cover meets the speaker body and gently pry it upward until it releases.
Insert a plastic spudger into the seam where the forward facing metal speaker cover meets the speaker body and gently pry it upward until it releases.
Step 7
- Locate the eight 8.9 mm screws on the face of the speaker assembly and remove them using a Phillips head #2 screwdriver.
Locate the eight 8.9 mm screws on the face of the speaker assembly and remove them using a Phillips head #2 screwdriver.
Step 8
- Insert a plastic spudger underneath one of the tabs on the front of the speaker assembly and gently raise it.
- Continue to the next step before attempting to lift the speaker assembly entirely away from the rest of the speaker to avoid damaging internal wire connections.
Insert a plastic spudger underneath one of the tabs on the front of the speaker assembly and gently raise it.
Continue to the next step before attempting to lift the speaker assembly entirely away from the rest of the speaker to avoid damaging internal wire connections.
Step 9
- Locate the two wire connections as shown underneath of the speaker assembly and unplug them using a pair of tweezers.
- Lift the speaker assembly away.
Locate the two wire connections as shown underneath of the speaker assembly and unplug them using a pair of tweezers.
Lift the speaker assembly away.
Step 10
- Locate the eight 7.5 mm screws across both of the speaker reverberators and remove them using a Phillips head #2 screwdriver.
- Lift the speaker reverberators away and replace them.
Locate the eight 7.5 mm screws across both of the speaker reverberators and remove them using a Phillips head #2 screwdriver.
Lift the speaker reverberators away and replace them.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
2 other people completed this guide.
Author
with 4 other contributors
Eric Coletto
Member since: 01/26/2017
113 Reputation
1 Guide authored
Badges:
6
+3 more badges
Team
IUPUI, Team 2-3, Baechle Spring 2017
Member of IUPUI, Team 2-3, Baechle Spring 2017
IUPUI-BAECHLE-S17S2G3
3 Members
3 Guides authored
El Duderino - Dec 4, 2018
Reply
Nice Guide, but do you know the exact speaker size and/or type?
I can not find the exact speakers.
THX
Elduderino79
