Difficulty
Moderate
Steps
5
Time Required
10 minutes
Sections
3
- Battery
- 2 steps
- Speaker Panel
- 2 steps
- Motherboard
- 1 step
Flags
1
Action Shots
Be an action hero! This guide needs images that better demonstrate how to perform specific actions.
BackSony SRS-X55
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Battery
- Remove the six screw covers with a spudger.
- Remove the six 11 mm Phillips screws from the bottom panel.
- Remove the bottom panel of the speaker.
Remove the six screw covers with a spudger.
Remove the six 11 mm Phillips screws from the bottom panel.
Remove the bottom panel of the speaker.
1024
Step 2
- Disconnect the battery cable from the motherboard.
- Remove the battery.
Disconnect the battery cable from the motherboard.
Remove the battery.
Step 3
Speaker Panel
- Remove the speaker grill by pushing on the two tabs in the corners.
Remove the speaker grill by pushing on the two tabs in the corners.
Step 4
- Remove the eight 0.5mm Phillips #1 screws from the speaker panel.
Remove the eight 0.5mm Phillips #1 screws from the speaker panel.
Step 5
Motherboard
- Flip open the speaker panel to access the interior of the device.
- Carefully unplug the three cables and one ribbon connector connected to the motherboard.
- Remove the motherboard.
Flip open the speaker panel to access the interior of the device.
Carefully unplug the three cables and one ribbon connector connected to the motherboard.
Remove the motherboard.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
with 4 other contributors
Jordon McDuffie
Member since: 01/31/2016
101 Reputation
2 Guides authored
Badges:
3
Team
University of Alabama, Team 1-3, Sydow campbell Spring 2016
Member of University of Alabama, Team 1-3, Sydow campbell Spring 2016
UA-SYDOW CAMPBELL-S16S1G3
5 Members
5 Guides authored
