Difficulty
Moderate
Steps
7
Time Required
5 minutes
Sections
2
- Display Assembly
- 4 steps
- Battery
- 3 steps
Flags
1
Incorrect Tools
Help make this guide better by using the correct tools in images and/or text.
BackSony Smart Watch SW2
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Display Assembly
- Detach the smart watch from the band by pushing on the back of the watch housing.
- The power button may fall out once the smart watch is detached.
- Set aside the power button and watch band as they are no longer needed for further disassembly.
Detach the smart watch from the band by pushing on the back of the watch housing.
The power button may fall out once the smart watch is detached.
Set aside the power button and watch band as they are no longer needed for further disassembly.
1024
Step 2
- Use a plastic opening tool to carefully pry the LCD screen from the watch housing.
Use a plastic opening tool to carefully pry the LCD screen from the watch housing.
Step 3
- Use a plastic opening tool or spudger to lift the screen assembly press-fit connector free.
Use a plastic opening tool or spudger to lift the screen assembly press-fit connector free.
Step 4
- Set aside the detached LCD screen to access the battery.
Set aside the detached LCD screen to access the battery.
Step 5
Battery
- Lift one side of the battery up carefully. There is a thin black circuit adhered to the back of the battery that connects to the motherboard and the charger.
- The connection is already broken in this image and you will not be able to lift the battery this high.
Lift one side of the battery up carefully. There is a thin black circuit adhered to the back of the battery that connects to the motherboard and the charger.
The connection is already broken in this image and you will not be able to lift the battery this high.
Step 6
- Push the black piece down while very carefully pulling the battery off. Work your way around without lifting the black piece up too much.
Push the black piece down while very carefully pulling the battery off. Work your way around without lifting the black piece up too much.
Step 7
- Once the battery is free from the frame adhesive, desolder the black and red battery wires.
- Remove the battery.
Once the battery is free from the frame adhesive, desolder the black and red battery wires.
Remove the battery.
To reassemble your device, follow these instructions in reverse order after the battery is replaced.
Cancel: I did not complete this guide.
2 other people completed this guide.
Author
with 4 other contributors
Vincent Shiue
Member since: 01/22/2018
256 Reputation
2 Guides authored
Badges:
5
+2 more badges
Team
IUPUI, Team S1-G5, Freund Spring 2018
Member of IUPUI, Team S1-G5, Freund Spring 2018
IUPUI-FREUND-S18S1G5
3 Members
2 Guides authored
hossamman2014 - Jul 19, 2018
Reply
HI
please from where can i get the battery i want new one you know any website sell this battery
thanks
S. Pamnco - Aug 26, 2018
I think AliExpress has some compatible batteries. I may order one too.