Difficulty

Moderate

Steps

8

Time Required

                          30 minutes

Sections

2

  • Battery
  • 2 steps
  • LCD Screen
  • 6 steps

Flags

0

  • BackSony RM-LVR1

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Battery
  • Use a Phillips #00 screwdriver to remove the four (4) screws on the back of the device.
  • If the screws strips or is previously stripped, refer to the stripped screw repair guide.

Use a Phillips #00 screwdriver to remove the four (4) screws on the back of the device.

If the screws strips or is previously stripped, refer to the stripped screw repair guide.

1024

Step 2

  • Battery is the rectangular and silver object in the center of device.
  • Remove battery with finger by prying at the rear.
  • If unable to remove battery, pry out using spudger.

Battery is the rectangular and silver object in the center of device.

Remove battery with finger by prying at the rear.

If unable to remove battery, pry out using spudger.

Step 3

              LCD Screen
  • Unscrew the 3 (three) screws holding the bracket in place.
  • Then remove the bracket by prying one end up.
  • Do not rip the ribbon cable connecting the bracket to the motherboard.

Unscrew the 3 (three) screws holding the bracket in place.

Then remove the bracket by prying one end up.

Do not rip the ribbon cable connecting the bracket to the motherboard.

Step 4

  • With tweezers, unplug the ribbon cable from the white connector.

With tweezers, unplug the ribbon cable from the white connector.

Step 5

  • Remove motherboard from the device by pulling upward gently, with fingers or tweezers.

Remove motherboard from the device by pulling upward gently, with fingers or tweezers.

Step 6

  • Gently push out on these two clips holding the LCD to the motherboard
  • Once you have the first two off, ever so carefully, push the LCD towards the remaining two clips.
  • There is a ribbon cable underneath the LCD connecting it to the motherboard. Avoid sharp, sudden movements to prevent it from being damged

Gently push out on these two clips holding the LCD to the motherboard

Once you have the first two off, ever so carefully, push the LCD towards the remaining two clips.

There is a ribbon cable underneath the LCD connecting it to the motherboard. Avoid sharp, sudden movements to prevent it from being damged

Step 7

  • Undo the ribbon cable attached between the motherboard and screen by prying up black tab which holds the cable, using spudger. (See pictures)

Undo the ribbon cable attached between the motherboard and screen by prying up black tab which holds the cable, using spudger. (See pictures)

Step 8

  • Remove the screen from the motherboard.

Remove the screen from the motherboard.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.

Author

                                      with 4 other contributors 


                    Alexander Thomas

Member since: 09/28/2017

265 Reputation

                                      2 Guides authored                  



                       Badges:
                       8







                                                        +5 more badges

Team

                       Eastern Washington University, Team S2-G2, Crane Fall 2017                        

                                                  Member of Eastern Washington University, Team S2-G2, Crane Fall 2017 



                    EWU-CRANE-F17S2G2                     


                                            3 Members                     


                                            6 Guides authored

Александр - Apr 6, 2018

Reply

здорово!

подскажите где купить дисплей?, или его маркировку?. на дисплее ничего не написано, не могу найти.

Sven van Bellen - Jul 7, 2019

Reply

Hi

I cant find an replacement lcd.

Could anybody help me where to get one?

Cheers

Sven

Bart Ptachowski - Aug 13, 2019

Reply

any link to the replacement LCD please?

ruigyl - Oct 20, 2019

Reply

Hi .

search : HD 170 LCD Drift aliexp****

i think it will do the job .

cheers