Difficulty
Moderate
Steps
8
Time Required
15 - 30 minutes
Sections
2
- Sony Radio Model CFD S05 Prerequisite steps Replacement
- 5 steps
- Optical Pickup Unit
- 3 steps
Flags
1
Markup Mishap
This guide needs better markups. Help out by correcting or making some markup annotations.
BackSony Radio CFD-S05
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Sony Radio Model CFD S05 Prerequisite steps Replacement
- Unscrew the screws on the top of the radio.
Unscrew the screws on the top of the radio.
1024
Step 2
- Open the CD and cassette doors and remove the screws in the compartments.
- To open the CD door push on the bottom left corner of the CD door. To open the cassette door push the button that is to the left of the pause button.
Open the CD and cassette doors and remove the screws in the compartments.
To open the CD door push on the bottom left corner of the CD door. To open the cassette door push the button that is to the left of the pause button.
Step 3
- Flip the radio upside down and remove the battery cover. Unscrew the one screw below the batteries.
Flip the radio upside down and remove the battery cover. Unscrew the one screw below the batteries.
Step 4
- Remove the top of the radio enough to access the wires for removal.
- Do not forcefully remove the whole top piece of the radio! There will be wires connected to the top cover and circuit board.
Remove the top of the radio enough to access the wires for removal.
Do not forcefully remove the whole top piece of the radio! There will be wires connected to the top cover and circuit board.
Step 5
- Remove all of the wires that are connected to both the circuit board and the underside of the top of the radio by pulling them where they are connected
- This should include three sets of red and white wires, one set of white wires, one set of black wires, and two ribbon wires. Some cannot be disconnected from the top piece of the radio. Disconnect these plugs from the circuit board.
Remove all of the wires that are connected to both the circuit board and the underside of the top of the radio by pulling them where they are connected
This should include three sets of red and white wires, one set of white wires, one set of black wires, and two ribbon wires. Some cannot be disconnected from the top piece of the radio. Disconnect these plugs from the circuit board.
Step 6
Optical Pickup Unit
- Unscrew the three screws on the optical pick up unit, which is on the underside of the cover
- The optical pick up unit is located directly beneath the CD player on the underside of the top face of the radio.
Unscrew the three screws on the optical pick up unit, which is on the underside of the cover
The optical pick up unit is located directly beneath the CD player on the underside of the top face of the radio.
Step 7
- Insert the new optical pick up unit.
- Make sure it is aligned properly.
Insert the new optical pick up unit.
Make sure it is aligned properly.
Step 8
- Screw in the new optical pick up unit.
Screw in the new optical pick up unit.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
One other person completed this guide.
Author
with 5 other contributors
Ian Nussman
Member since: 10/25/2013
959 Reputation
6 Guides authored
Badges:
11
+8 more badges
Team
UMass Dartmouth, Team 2-5, Gulbrandsen Fall 2013
Member of UMass Dartmouth, Team 2-5, Gulbrandsen Fall 2013
UMASSD-GULBRANDSEN-F13S2G5
2 Members
6 Guides authored