Sony Radio Cd Player And Cassette Player Cfd S05 Circuit Board Replacement Repair Guide

Difficulty

Moderate

Steps

10

Time Required

                          20 - 30 minutes            

Sections

2

• Sony Radio Model CFD S05 Prerequisite steps Replacement
• 5 steps
• Circuit Board
• 5 steps

Flags

1

Markup Mishap

This guide needs better markups. Help out by correcting or making some markup annotations.

• BackSony Radio CFD-S05

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

What you need

Step 1

              Sony Radio Model CFD S05 Prerequisite steps Replacement               

• Unscrew the screws on the top of the radio.

Unscrew the screws on the top of the radio.

1024

Step 2

• Open the CD and cassette doors and remove the screws in the compartments.
• To open the CD door push on the bottom left corner of the CD door. To open the cassette door push the button that is to the left of the pause button.

Open the CD and cassette doors and remove the screws in the compartments.

To open the CD door push on the bottom left corner of the CD door. To open the cassette door push the button that is to the left of the pause button.

Step 3

• Flip the radio upside down and remove the battery cover. Unscrew the one screw below the batteries.

Flip the radio upside down and remove the battery cover. Unscrew the one screw below the batteries.

Step 4

• Remove the top of the radio enough to access the wires for removal.
• Do not forcefully remove the whole top piece of the radio! There will be wires connected to the top cover and circuit board.

Remove the top of the radio enough to access the wires for removal.

Do not forcefully remove the whole top piece of the radio! There will be wires connected to the top cover and circuit board.

Step 5

• Remove all of the wires that are connected to both the circuit board and the underside of the top of the radio by pulling them where they are connected
• This should include three sets of red and white wires, one set of white wires, one set of black wires, and two ribbon wires. Some cannot be disconnected from the top piece of the radio. Disconnect these plugs from the circuit board.

Remove all of the wires that are connected to both the circuit board and the underside of the top of the radio by pulling them where they are connected

This should include three sets of red and white wires, one set of white wires, one set of black wires, and two ribbon wires. Some cannot be disconnected from the top piece of the radio. Disconnect these plugs from the circuit board.

Step 6

              Circuit Board               

• Unscrew the screws in the circuit board.

Unscrew the screws in the circuit board.

Step 7

• Unlodge the green headphone jack on the back of the circuit board by pulling on the back of the radio and lifting the circuit board up.
• This may be a little difficult and don’t pull to hard because the radio may crack.

Unlodge the green headphone jack on the back of the circuit board by pulling on the back of the radio and lifting the circuit board up.

This may be a little difficult and don’t pull to hard because the radio may crack.

Step 8

• Lift the circuit board out of the radio.

Lift the circuit board out of the radio.

Step 9

• Insert and align the new circuit board and screw it down.

Insert and align the new circuit board and screw it down.

Step 10

• Reconnect the wires that were unplugged from the prerequisite steps.

Reconnect the wires that were unplugged from the prerequisite steps.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      5 other people completed this guide.                                             

Author

                                      with 3 other contributors 

                    Ian Nussman                     

Member since: 10/25/2013

959 Reputation

                                      6 Guides authored                  



                       Badges:
                       11







                                                        +8 more badges                           

Team

                       UMass Dartmouth, Team 2-5, Gulbrandsen Fall 2013                        

                                                  Member of UMass Dartmouth, Team 2-5, Gulbrandsen Fall 2013 



                    UMASSD-GULBRANDSEN-F13S2G5                     


                                            2 Members                     


                                            6 Guides authored                     

Francois - Aug 9, 2020

Reply

Where can I get the part?