Difficulty

Moderate

Steps

6

Time Required

                          15 - 20 minutes

Sections

2

  • Earpiece
  • 4 steps
  • Speaker
  • 2 steps

Flags

0

  • BackSony Pulse Elite Edition

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Identifying Earpiece
  • Locate the left side designation on the headband-earpiece junction.
  • The battery is in the right earpiece.
  • The motherboard is in the left earpiece.

Locate the left side designation on the headband-earpiece junction.

The battery is in the right earpiece.

The motherboard is in the left earpiece.

1024

Step 2

              Ear Cushion Removal
  • Gently pull around the perimeter of the left ear cushion until it comes off.

Gently pull around the perimeter of the left ear cushion until it comes off.

Step 3

              Outer Ear Rim Removal
  • Use the PH00 Screwdriver to remove the three Phillips 6mm screws around the perimeter of the ear cup.
  • Gently pull the outer ear rim off of the headset assembly.
  • Harsh removal may cause permanent damage to the speaker wires.

Use the PH00 Screwdriver to remove the three Phillips 6mm screws around the perimeter of the ear cup.

Gently pull the outer ear rim off of the headset assembly.

Harsh removal may cause permanent damage to the speaker wires.

Step 4

              Remove Speaker Housing
  • Using tweezers, gently pry the red and black speaker wires from the attached socket.

Using tweezers, gently pry the red and black speaker wires from the attached socket.

Step 5

              Speaker
  • Locate the junction of the electrical speaker and the plastic speaker housing.
  • Use the spudger to sever the glue at this junction.
  • Remove the electrical speaker from the speaker housing.

Locate the junction of the electrical speaker and the plastic speaker housing.

Use the spudger to sever the glue at this junction.

Remove the electrical speaker from the speaker housing.

Step 6

  • Use super glue to fasten the replacement speaker into the speaker housing.

Use super glue to fasten the replacement speaker into the speaker housing.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      4 other people completed this guide.

Author

                                      with 2 other contributors 


                    Armon Davani

Member since: 01/29/2015

373 Reputation

                                      2 Guides authored                  



                       Badges:
                       9







                                                        +6 more badges

Team

                       Clemson, Team 14-2, Shirley Spring 2015                        

                                                  Member of Clemson, Team 14-2, Shirley Spring 2015 



                    CLEM-SHIRLEY-S15S14G2                     


                                            5 Members                     


                                            12 Guides authored