Difficulty

Moderate

Steps

5

Time Required

                          15 - 20 minutes

Sections

2

  • Earpiece
  • 4 steps
  • Battery
  • 1 step

Flags

0

  • BackSony Pulse Elite Edition

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Identifying Earpiece
  • Locate the left side designation on the headband-earpiece junction.
  • The battery is in the right earpiece.
  • The motherboard is in the left earpiece.

Locate the left side designation on the headband-earpiece junction.

The battery is in the right earpiece.

The motherboard is in the left earpiece.

1024

Step 2

              Ear Cushion Removal
  • Gently pull around the perimeter of the left ear cushion until it comes off.

Gently pull around the perimeter of the left ear cushion until it comes off.

Step 3

              Outer Ear Rim Removal
  • Use the PH00 Screwdriver to remove the three Phillips 6mm screws around the perimeter of the ear cup.
  • Gently pull the outer ear rim off of the headset assembly.
  • Harsh removal may cause permanent damage to the speaker wires.

Use the PH00 Screwdriver to remove the three Phillips 6mm screws around the perimeter of the ear cup.

Gently pull the outer ear rim off of the headset assembly.

Harsh removal may cause permanent damage to the speaker wires.

Step 4

              Remove Speaker Housing
  • Using tweezers, gently pry the red and black speaker wires from the attached socket.

Using tweezers, gently pry the red and black speaker wires from the attached socket.

Step 5

              Remove Battery
  • Lift up battery and disconnect wires using tweezers.
  • Use a new battery for reconstruction.

Lift up battery and disconnect wires using tweezers.

Use a new battery for reconstruction.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      8 other people completed this guide.

Author

                                      with 2 other contributors 


                    Chris Echter

Member since: 01/29/2015

862 Reputation

                                      4 Guides authored                  



                       Badges:
                       13







                                                        +10 more badges

Team

                       Clemson, Team 14-2, Shirley Spring 2015                        

                                                  Member of Clemson, Team 14-2, Shirley Spring 2015 



                    CLEM-SHIRLEY-S15S14G2                     


                                            5 Members                     


                                            12 Guides authored

francisklalumiere - Nov 29, 2015

Reply

Where can I buy the replacement battery for this?

Pretty hard to find…

David McAndrews - Dec 8, 2015

Reply

Replacement batteries can be found by googling “SP70C battery”. It is a Lithium battery with 900mAh and a 3.7v output. AliExpress shows them for $11 including shipping.

marit - Nov 11, 2016

Reply

Can I mod and replace the battery with a bigger one with no white connection, just positive and negative? Thanks!

sharku19z - Jan 28, 2017

Reply

Garrett Parmenter - Feb 4, 2017

Reply

i just attempted… the connector to the battery just pulled off. NOTE: Pull up from PCB not out. The connector sets down into it.