Difficulty
Easy
Steps
4
Time Required
5 minutes
Sections
1
- Rear Case
- 4 steps
Flags
Better Introduction
Improve this guide by completing or revising its introduction.
BackSony PlayStation 3D Display
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
What you need
Step 1
Rear Case
- Remove the base by pushing in the button and sliding out the unit.
Remove the base by pushing in the button and sliding out the unit.
1024
Step 2
- Remove USB port cover from back plate with a metal spudger.
- This will prevent the cover from falling under the back plate once it is removed.
Remove USB port cover from back plate with a metal spudger.
This will prevent the cover from falling under the back plate once it is removed.
Step 3
- With the Phillips #02 screwdriver, remove the six 6 mm length x 6 mm head screws from the back plate.
- With the Phillips #02 screwdriver, remove the ten 6 mm length x 8 mm head screws from the back plate.
- These screws have different threads and need to be kept separate.
With the Phillips #02 screwdriver, remove the six 6 mm length x 6 mm head screws from the back plate.
With the Phillips #02 screwdriver, remove the ten 6 mm length x 8 mm head screws from the back plate.
These screws have different threads and need to be kept separate.
Step 4
- Remove back plate with a plastic opening tool by slowing prying around the entire plate.
- Be gentle to avoid breaking the plastic clips which hold the plate.
- Once separated the plate easily lifts off.
Remove back plate with a plastic opening tool by slowing prying around the entire plate.
Be gentle to avoid breaking the plastic clips which hold the plate.
Once separated the plate easily lifts off.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
3 other people completed this guide.
Author
with 8 other contributors
Tia McNaughton
Member since: 10/01/2015
379 Reputation
3 Guides authored
Badges:
8
+5 more badges
Team
Cal Poly, Team 12-16, Maness Fall 2015
Member of Cal Poly, Team 12-16, Maness Fall 2015
CPSU-MANESS-F15S12G16
4 Members
8 Guides authored
Kodi Taylor - Aug 24, 2018
Reply
I got a used display that for some reason came with no screws on the back panel. Can you tell me exactly what type those 6x6mm and 6x8mm screws are? Especially wary since you said the thread sizes are different