Difficulty
Moderate
Steps
6
Time Required
20 minutes
Sections
2
- Rear Case
- 4 steps
- Power Port
- 2 steps
Flags
0
BackSony PlayStation 3D Display
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Rear Case
- Remove the base by pushing in the button and sliding out the unit.
Remove the base by pushing in the button and sliding out the unit.
1024
Step 2
- Remove USB port cover from back plate with a metal spudger.
- This will prevent the cover from falling under the back plate once it is removed.
Remove USB port cover from back plate with a metal spudger.
This will prevent the cover from falling under the back plate once it is removed.
Step 3
- With the Phillips #02 screwdriver, remove the six 6 mm length x 6 mm head screws from the back plate.
- With the Phillips #02 screwdriver, remove the ten 6 mm length x 8 mm head screws from the back plate.
- These screws have different threads and need to be kept separate.
With the Phillips #02 screwdriver, remove the six 6 mm length x 6 mm head screws from the back plate.
With the Phillips #02 screwdriver, remove the ten 6 mm length x 8 mm head screws from the back plate.
These screws have different threads and need to be kept separate.
Step 4
- Remove back plate with a plastic opening tool by slowing prying around the entire plate.
- Be gentle to avoid breaking the plastic clips which hold the plate.
- Once separated the plate easily lifts off.
Remove back plate with a plastic opening tool by slowing prying around the entire plate.
Be gentle to avoid breaking the plastic clips which hold the plate.
Once separated the plate easily lifts off.
Step 5
Power Port
- With the Phillips #02 screwdriver, remove the two 5mm length x 7mm head screws from the left and right side of the power port plate.
With the Phillips #02 screwdriver, remove the two 5mm length x 7mm head screws from the left and right side of the power port plate.
Step 6
- Remove the power port by depressing the white tab attached to the wires.
Remove the power port by depressing the white tab attached to the wires.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
One other person completed this guide.
Author
with 5 other contributors
Logan Simon
Member since: 10/08/2015
234 Reputation
1 Guide authored
Badges:
11
+8 more badges
Team
Cal Poly, Team 12-16, Maness Fall 2015
Member of Cal Poly, Team 12-16, Maness Fall 2015
CPSU-MANESS-F15S12G16
4 Members
8 Guides authored