Difficulty
Very easy
Steps
3
Time Required
1 minute
Sections
1
- Battery
- 3 steps
Flags
0
BackSony NEX-7
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
Step 1
Battery
- We need to turn off the camera because we are removing components that could get damaged if the power is still on.
- If the camera is on, rotate the power switch on top of the camera counterclockwise to turn the camera off.
We need to turn off the camera because we are removing components that could get damaged if the power is still on.
If the camera is on, rotate the power switch on top of the camera counterclockwise to turn the camera off.
1024
Step 2
- Flip the camera over such that the power switch points down.
- Slide the switch on the bottom of the camera grip towards the lens to open the battery door.
Flip the camera over such that the power switch points down.
Slide the switch on the bottom of the camera grip towards the lens to open the battery door.
Step 3
- With the battery door open, push the blue lever in the battery compartment to release the battery.
With the battery door open, push the blue lever in the battery compartment to release the battery.
To replace the battery, fit it in the slot, then close and lock the door.
Cancel: I did not complete this guide.
2 other people completed this guide.
Author
with 3 other contributors
Tyler
Member since: 04/22/2014
551 Reputation
1 Guide authored
Badges:
13
+10 more badges
Team
Cal Poly, Team 10-55, Amido Spring 2014
Member of Cal Poly, Team 10-55, Amido Spring 2014
CPSU-AMIDO-S14S10G55
4 Members
31 Guides authored
Martin Hurley - Aug 13, 2020
Reply
I’ve done this about a million times. :)