Sony Nex 5T Sd Card Replacement Repair Guide

Difficulty

Very easy

Steps

Time Required

                          45 seconds

Sections

SD Card
4 steps

Flags

Better Introduction

Improve this guide by completing or revising its introduction.

BackSony NEX-5T
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications

What you need

Step 1

              SD Card

Make sure to turn the cameras power switch to off before beginning this step.
Begin by holding the camera upside down with the bottom facing you. Identify the housing for the SD card, and battery.
You will use your other hand to slide the lock switch to this housing to the right. This will release the cap, allow it to come upwards.

Make sure to turn the cameras power switch to off before beginning this step.

Begin by holding the camera upside down with the bottom facing you. Identify the housing for the SD card, and battery.

You will use your other hand to slide the lock switch to this housing to the right. This will release the cap, allow it to come upwards.

1024

Step 2

Now that the cap to the battery and SD card housing is open, the SD card is visible.
You will need to press down on the SD card until you hear a click. Release the SD card and it will now be available to remove.
Grip the SD card and pull it out of the SD card slot.

Now that the cap to the battery and SD card housing is open, the SD card is visible.

You will need to press down on the SD card until you hear a click. Release the SD card and it will now be available to remove.

Grip the SD card and pull it out of the SD card slot.

Step 3

To reinsert the SD card place it in its housing.
You will then need to push down on the SD card until you hear a click.
To ensure the SD card is in place you can visually inspect it. The SD card should be flush with the housing.

To reinsert the SD card place it in its housing.

You will then need to push down on the SD card until you hear a click.

To ensure the SD card is in place you can visually inspect it. The SD card should be flush with the housing.

Step 4

You may now close the housing for the SD card and battery.
Close the cap and while holding it down slide the locking tab to the left. This step should lock the cap in place.
Your SD card is now safely in place and you may turn your device on.

You may now close the housing for the SD card and battery.

Close the cap and while holding it down slide the locking tab to the left. This step should lock the cap in place.

Your SD card is now safely in place and you may turn your device on.

Cancel: I did not complete this guide.

Author

                                      with 1 other contributor

                    Robert Phillips

Member since: 03/02/2017

297 Reputation

                                      2 Guides authored                  



                       Badges:
                       6







                                                        +3 more badges

Team

                       USF Tampa, Team S13-G2, Cagle Spring 2017                        

                                                  Member of USF Tampa, Team S13-G2, Cagle Spring 2017 



                    USFT-CAGLE-S17S13G2                     


                                            3 Members                     


                                            12 Guides authored

Better Introduction#

What you need#

#

#

#

#

#

#

Team#

#

Better Introduction

What you need

Team