Difficulty
Moderate
Steps
5
Time Required
10 - 20 minutes
Sections
1
- Battery
- 5 steps
Flags
In Progress
This guide is a work in progress. Reload periodically to see the latest changes!
Needs More Images
A few more images would make this guide’s procedures crystal clear.
Missed a Step
Oops! This guide is currently missing some important steps.
Member-Contributed Guide
An awesome member of our community made this guide. It is not managed by iFixit staff.
Missing Details
Some of this guide’s details are missing. Help users by adding tools, difficulty, or time.
BackSony MDR-XB950N1
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Remove the Earcups
- Remove the earcups by carefully peeling them away
Remove the earcups by carefully peeling them away
1024
Step 2
Remove the Screws
- Remove the 4 screws on the inside by using a 00 head (Note: you should use an extremly thin screwdriver, one with changeable bits like the ifixit one is too big)
Remove the 4 screws on the inside by using a 00 head (Note: you should use an extremly thin screwdriver, one with changeable bits like the ifixit one is too big)
Step 3
- Remove the driver by pulling it out
- Be careful to not demage the cable
Remove the driver by pulling it out
Be careful to not demage the cable
Step 4
- Remove the cable from the connector
Remove the cable from the connector
Step 5
- Disconnect the battery connector and pull the battery out. There is light adhesive holding it in
Disconnect the battery connector and pull the battery out. There is light adhesive holding it in
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
with 1 other contributor
Luis Blanken
Member since: 06/10/2019
121 Reputation
1 Guide authored
Badges:
1
R Lintott - May 27, 2022
Reply
pictures please